Operation Manual

Crestron Connected Support
143
Crestron Connected Tools Window
Settings on the Tools window let you customize various projector setup
features.
A
Make settings for Crestron central controllers.
B
Projector Name Enter a name to differentiate the projector that is
currently connected from other projectors on the
network. (up to 16 alphanumeric characters)
Location Enter an installation location name for the projector
that is currently connected on the network. (up to 32
alphanumeric characters and symbols)
Assigned To Enter a user name for the projector. (up to 32
alphanumeric characters and symbols)
DHCP Select to use DHCP. You cannot enter an IP address if
DHCP is enabled.
IP Address Enter the IP address to assign to the currently
connected projector.
Subnet Mask Enter a subnet mask for the currently connected
projector.
Default Gateway Enter the gateway address for the currently connected
projector.
Send Click to confirm the changes made to the Projector.
C
Enabled (Admin
Password)
Select to require a password to open the Tools window.
New Password Enter the new password when changing the password
to open the Tools window. (up to 26 alphanumeric
characters)
Confirm Enter the same password as you entered in New
Password. If the passwords are not the same, an error
is displayed.
Send Click to confirm the changes made to the Admin
Password.