Operation Manual

Projector Setup Settings - Extended Menu
159
Setting Options Description
High Altitude
Mode
High Altitude Mode: regulates the
projector’s operating temperature at
altitudes above 1500 m.
Auto Source Search Auto Source Search: set to On to detect
the input signal automatically and
project images when there is no input
signal.
This function is disabled when you turn
on the projector in the Quick Startup
mode.
Auto Power On Auto Power On: select the image source
from which you want to automatically
start projection. When the projector
detects the input signal from the selected
image source, it projects automatically in
standby mode.
The following image sources are available
for this feature:
• HDMI1
• Computer1
Startup Source Select the image source you want to
project when the projector is turned on
in Content Playback mode.
Quick Startup Quick Startup: select the time period for
Quick Startup mode. The projector
enters this mode when you turn it off.
You can start projecting in
approximately five seconds by pressing
the power button.
Enabling this item increases standby
power consumption.
Set A/V Output to While Projecting
first.
s Extended > A/V Settings > A/V
Output
Setting Options Description
Monitor Out Port Monitor Out Port: changes the input
and output for the Computer2/Monitor
Out ports. When outputting images to an
external monitor, select Monitor Out.
When inputting image signals from a
computer or component video signals
from other video sources, select
Computer2.
A/V Mute Settings Adjusts the A/V Mute settings.
A/V Mute Timer: turns off the projector
automatically if A/V Mute is enabled and
30 minutes of inactivity has passed.
A/V Mute Release: select A/V Mute if
you want to use only the [A/V Mute]
button to turn off A/V Mute, or select
Any Button to use any button to turn it
off.