Operation Manual

Projector Setup Settings - Extended Menu
160
Setting Options Description
Advanced Remote Control Type: select Normal to
use the remote control that came with
the projector, or Advanced to use a high-
functioning Epson projector remote
control and disable the remote control
that came with the projector.
Beep: controls the beep that sounds
when you turn the projector on or off.
Indicators: select Off to turn off
projector lights, except in a warning
condition.
Inv Direction Button: enable this setting
if you installed the projector on a ceiling
and want to invert the direction of the
arrow buttons on the control panel.
Batch Setup Range: select All to copy all
of the projector menu settings using the
batch setup feature. Select Limited, if you
do not want to copy the following
settings:
• Password Protection settings
• EDID in the Signal menu
• Network menu settings
Date & Time Date & Time: adjusts the projector's
system time and date settings.
• Daylight Saving Time: set to On to
activate daylight saving time.
• Internet Time: set to On to update the
time automatically through an Internet
time server.
A/V Settings Selects various audio and video output
settings:
A/V Output A/V Output: set to Always On to output
audio and images to external devices
when the projector is in standby mode.
Set Quick Startup to Off first.
s Extended > Operation > Quick
Startup
Setting Options Description
Audio Settings Audio Output: selects the audio input
port when projecting images from
anything except for HDMI ports.
HDMI1 Audio Output/HDMI2 Audio
Output: selects the audio input port
when projecting images from HDMI
ports.
Standby Mode Available when you have set A/V Output
to While Projecting, and Control
Communications and Extron XTP to
Off.
s Extended > A/V Settings > A/V
Output
s Extended > HDBaseT > Control
Communications
s Extended > HDBaseT > Extron
XTP
Standby Mode Communication On indicates that the
projector can be monitored over a
network when the projector is in standby
mode. Enable this setting to allow the
following operations to occur when the
projector is in standby mode:
• Monitor and control the projector over
a network
• Output audio and images to an
external device
• Communication from the HDBaseT
port *
Port Selects the port to use from Wired LAN
or Wireless LAN while the Standby
Mode setting is set to Communication
On.
s Extended > Standby Mode >
Standby Mode