Operation Manual

Projector Network Settings - Network Menu
165
Setting Options Description
Adjust Image
Quality
Adjusts the screen mirroring
speed/quality.
When you want to increase image
quality, select a small number. When you
want to increase processing speed, select
a large number.
Connection Mode Selects the type of WPS (Wi-Fi Protected
Setup) when you connect to the network
wirelessly. Select PIN to improve the
connection security. If your mobile
device supports only the PBC
connection, select PIN/PBC.
Available when you have set Operation
Mode to Basic.
Extended Available when you have set Operation
Mode to Extended.
Meeting Mode Selects the type of meeting.
• Interruptions OK: lets you connect to
another mobile device during Screen
Mirroring projection.
• No Interruptions: lets you exclusively
connect to one device.
Channel Selects the wireless channel used by
Screen Mirroring.
Display Display PIN Code Set to On to display the eight-digit PIN
code on the projected image when
projecting input sources other than
Screen Mirroring.
Display Device
Name
Set to On to display the newly connected
device name on the projected image
when projecting input sources other than
Screen Mirroring.
Reset — Resets all adjustment values on the
Screen Mirroring Settings menu to their
default settings.
Network Menu - Basic Menu
Settings on the Basic menu let you select the basic network settings.
s Network > Network Configuration > Basic
Setting Options Description
Projector Name Up to 16
alphanumeric
characters
(do not use " * + ,
/ : ; < = > ? [ \ ] ` |
spaces)
Enter a name to identify the projector
over the network.
PJLink Password Up to 32
alphanumeric
characters
Enter a password for using the PJLink
protocol for projector control.
Remote Password Up to 8
alphanumeric
characters
(do not use * :
spaces)
Enter a password for accessing the
projector using the Basic Control. (User
name is EPSONREMOTE; default
password is guest.)