Operation Manual

Projector Indicator Status
189
The indicators on the projector indicate the projector status and let you know
when a problem occurs. Check the status and color of the indicators and then
refer to this table for a solution.
a
• If the indicators display a pattern not listed in the table below, turn
the projector off, unplug it, and contact Epson for help.
A
WLAN (wireless LAN) indicator
B
Filter indicator
C
Temp (temperature) indicator
D
Laser indicator
E
Status indicator
F
On/Standby (power) indicator
Projector status
Indicator and status Problem and solutions
Power: Lit blue
Status: Lit blue
Laser: Off
Temp: Off
Filter: Off
Normal operation.
Power: Lit blue
Status: Flashing blue
Laser: Off
Temp: Off
Filter: Off
Warming up or shutting down. When warming up, wait
about 30 seconds for an image to appear.
All buttons are disabled during warm-up and shutting
down.
Power: Lit blue
Status: Off
Laser: Off
Temp: Off
Filter: Off
Standby, sleep mode, or monitoring.
When you press the power button, projection starts.
Power: Flashing blue
Status: Off
Laser: Off
Temp: Off
Filter: Off
Preparing for monitoring or quick startup mode. All
features are disabled.
Power: Lit blue
Status: Flashing blue
Laser: Off
Temp: Off
Filter: Off
Cooling down; all buttons are disabled.