Operation Manual

Solving Network Problems
200
Check the solutions in these sections if you have problems using the projector
on a network.
gg Related Links
• "Solutions When Wireless Authentication Fails" p.200
• "Solutions When You Cannot Access the Projector Through the Web" p.200
• "Solutions When Network Alert E-Mails are not Received" p.200
• "Solutions When the Image Contains Static During Network Projection"
p.201
• "Solutions When You Cannot Connect Using Screen Mirroring" p.201
• "Solutions When the Image or Sound Contains Static During Screen
Mirroring Connection" p.201
Solutions When Wireless Authentication Fails
If you are having trouble with the authentication, try the following solutions:
• If the wireless settings are correct, but authentication fails, you may need to
update the Date & Time settings on the projector's Extended menu.
s Extended > Operation > Date & Time
• Check the Security settings in the projector's Network menu.
s Network > Network Configuration > Wireless LAN
gg Related Links
• "Projector Setup Settings - Extended Menu" p.158
• "Network Menu - Wireless LAN Menu" p.166
Solutions When You Cannot Access the Projector
Through the Web
If you are unable to access the projector through a Web browser, make sure
you are using the correct ID and password.
• For the user ID, enter EPSONWEB. (You cannot change the user ID.)
• For the password, enter the password set in the projector's Network menu.
The default password is admin.
• Make sure you have access to the network the projector is on.
• If your Web browser is set up to connect via a proxy server, the Epson Web
Control screen cannot be displayed. Make settings for a connection without
using a proxy server.
a
The user ID and password are case sensitive.
gg Related Links
• "Network Menu - Basic Menu" p.165
Solutions When Network Alert E-Mails are not
Received
If you do not receive an e-mail alerting you to problems with a projector over
the network, try the following solutions:
• Make sure the projector is turned on and connected to the network
correctly. (If an error shuts down the projector, the email may not be
delivered.)
• Make sure you set up the projector e-mail alert settings correctly on the
projector's network Notifications menu or in the network software.
• Set the Standby Mode setting to Communication On so that the network
software can monitor the projector in standby mode.
s Extended > Standby Mode > Standby Mode
• Change the Port setting according to your network environment.
s Extended > Standby Mode > Port
gg Related Links
• "Network Menu - Notifications Menu" p.169