Operation Manual

Setting the Screen Type
42
You can use the Screen Type setting to match the aspect ratio of the displayed
image to the screen you are using.
a
This setting is unavailable when using one of the following input
sources:
USB
LAN
a
Turn on the projector and display an image.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Extended menu and press [Enter].
d
Select Display > Screen > Screen Type.
You see this screen:
e
Select your screen's aspect ratio and press [Enter].
f
Press [Menu] to exit the menus.
g
Adjust the aspect ratio for the projected image, if necessary.
gg Related Links
• "Adjusting the Image Position Using Screen Position" p.42
Adjusting the Image Position Using Screen Position
You can adjust the image position if there are margins between the edge of
the image and the projected screen frame.
a
You cannot adjust the screen position if the Screen Type setting is
set to 16:10 for a WXGA/WUXGA projector model or 4:3 for a XGA
projector model.
a
Turn on the projector and display an image.
b
Press the [Menu] button on the control panel or remote control.