Operation Manual

Displaying a Test Pattern
46
You can display a test pattern to adjust the projected image without
connecting a computer or video device.
a
The test pattern's shape is determined by the Screen Type setting. Be
sure to set the correct screen type before adjusting with the test pattern.
s Extended > Display > Screen > Screen Type
a
Turn on the projector.
b
Press the down arrow button on the control panel.
a
You can also display the Test Pattern setting in the projector's
Settings menu.
The test pattern is displayed.
c
Press the down arrow button on the control panel again, and then press
[Enter] to display the pattern you want.
d
While the pattern is displayed, press the left or right arrow button on
the remote control or press [Enter] to cycle through the available test
patterns.
e
Adjust the image as necessary.
f
Press [Esc] to clear the test pattern.
gg Related Links
• "Available Test Pattern Image Adjustments" p.46
Available Test Pattern Image Adjustments
You can adjust the following settings while the test pattern is displayed.