Operation Manual
Projecting in Content Playback Mode
83
Adding Effects to Your Projected Image
You can add color and shape effects to the projected image in Content
Playback mode.
a
To use the effect functions, make sure you perform Refresh Mode
regularly.
s Reset > Refresh Mode
a
In Content Playback mode, press the [Menu] button, select the Settings
menu, and then press [Enter].
b
Select Content Playback > Overlay Effect, and press [Enter].
c
Select On as the Overlay Effect setting and press [Enter].
d
Select Shape Filter and press [Enter].
e
Adjust each of the following options as necessary:
• Shape to select the shape effect you want from circles, rectangles, or
customized shapes.
a
You can add your images as customized shapes using the
Epson Projector Content Manager software. See the Epson
Projector Content Manager Operation Guide for details.
• Filter Effect to select whether to mask inside or outside of the
selected shape.
• Size to set the shape size.
• Position to set the shape position.
f
Select Color Filter and press [Enter].
g
Adjust each of the following options as necessary:
• Color Filter to select the color.
• Custom to set a customized color by adjusting Red, Green, and Blue
individually.
h
Select Lightness to set the brightness level.
i
When you are finished, press [Menu] to exit the menus.