Operation Manual

Saving a User's Logo Image

For the 400x300 size, use the arrow buttons to surround the image area

you want to use as the user's logo, and then press [Enter].

You see a prompt asking if you want to select this image area.

Select Yes and press [Enter]. (If you want to change the selected area,

select No, press [Enter], and repeat the last step.)

You see the User's Logo zoom factor menu.

For the 400x300 size, select a zoom percentage, press [Enter], select

Yes, and press [Enter].

The user's logo is overwritten and a completion message is displayed.

Press [Esc] to exit the message screen.

Select the Extended menu and press [Enter].

Select Display and press [Enter].

Select when you want to display the User's Logo screen:

• To display it whenever there is no input signal, select Display

Background and set it to Logo.

s Extended > Display > Display Background

• To display it whenever you turn the projector on, select Startup

Screen and set it to On.

s Extended > Display > Startup Screen

To prevent anyone from changing the User's Logo settings without first

entering a password, set the User's Logo Protection setting to On in the

Password Protection setting menu and set the password.

gg Related Links

• "Selecting Password Security Types" p.100