Operation Manual

Projector Parts and Functions

The following sections explain the projector parts and their functions.

All of the features in this guide are explained using illustrations of EB‑W05

unless otherwise mentioned.

gg Related Links

• "Projector Parts - Front" p.10

• "Projector Parts - Rear" p.11

• "Projector Parts - Base" p.12

• "Projector Parts - Control Panel" p.13

• "Projector Parts - Remote Control" p.14

Projector Parts - Front

Name Function

Air exhaust vent Exhaust vent for air used to cool the projector

internally.

Name Function

Warning

Do not look into the vents. If the lamp

explodes, gases may escape and small

fragments of glass may be scattered which

could cause an injury. Contact a doctor if any

fragments of broken glass are inhaled or get

into the eyes or mouth.

Caution

While projecting, do not put your face or

hands near the air exhaust vent, and do not

place objects that may become warped or

damaged by heat near the vent. Hot air from

the air exhaust vent could cause burns,

warping, or accidents to occur.

A/V Mute slide lever Slide the knob to open and close the lens cover.

Foot release lever Press the foot release lever to extend and retract the

front adjustable foot.

Lens cover Close when not using the projector to protect the lens.

By closing it during projection you can hide the image

and the sound.

Front adjustable foot When the projector is set up on a surface such as a

desk, extend the foot to adjust the position of the

image.

Lens Images are projected from here.

Remote receiver Receives signals from the remote control.

Horizontal keystone

slider

Corrects horizontal distortion in the projected image.

Air intake vent (air

filter)

Takes in air to cool the projector internally.

Air filter cover Open to access the air filter.