Operation Manual

Using the Remote Control as a Wireless Mouse

You can use the projector's remote control as a wireless mouse so you can

control projection at a distance from the computer.

You can use the wireless mouse features with Windows Vista and later,

or OS X 10.7.x and later.

Connect the projector to a computer using the projector's USB-B,

Computer, or HDMI port.

The wireless mouse function does not work when projecting

images from a device connected to the HDMI/MHL port using

an MHL cable (EB‑U42/EB‑W42/EB‑W41/EB‑U05/EB‑U140).

If you connected your computer to the port other than the USB-B port,

also connect a USB cable to the projector's USB-B port and to a USB

port on your computer (for wireless mouse support).

Start your presentation.

Use the following buttons on the remote control to control your

presentation:

• To move through slides or pages, press the [Page] up or down

buttons.

• To move the cursor on the screen, use the arrow buttons. To move

the cursor diagonally, press any pair of adjacent arrow buttons at the

same time.

• To left-click, press the [Enter] button once (press it twice to double-

click). To right-click, press the [Esc] button.

• To drag-and-drop, hold the [Enter] button as you move the cursor

with the arrow buttons, then release [Enter] at the destination.

• If the mouse button settings are set to reverse on the computer, the

operation of the remote control buttons is also reversed.

• The Wireless Mouse function does not work under the following

conditions:

• When the projector's menu or a Help screen is displayed.

• When operating functions other than the Wireless Mouse function

(such as adjusting the volume).

However, when using the E-Zoom or Pointer function, the page up

or down function is available.