Operation Manual

Saving a User's Logo Image

Use the arrow buttons to surround the image area you want to use as

the user's logo and press [Enter].

You see a prompt asking if you want to select this image area.

You cannot change the image area size (400 × 300 pixels).

Select Yes and press [Enter]. (If you want to change the selected area,

select No, press [Enter], and repeat the last step.)

You see the User's Logo zoom factor menu.

Select a zoom percentage and press [Enter].

You see a prompt asking if you want to save the image as the user's

logo.

Select Yes and press [Enter].

The user's logo is overwritten and a completion message appears.

Press [Esc] to exit the message screen.

Select the Extended menu and press [Enter].

Select Display and press [Enter].

Select when you want to display the User's Logo screen:

• To display it whenever there is no input signal, select Display

Background and set it to Logo.

• To display it whenever you turn the projector on, select Startup

Screen and set it to On.

• To display it whenever you press the [A/V Mute] button, select A/V

Mute and set it to Logo.

To prevent anyone from changing the User's Logo settings without first

entering a password, set the User's Logo Protection setting to On in the

Password Protection setting menu and set the password.

gg Related Links

• "Shutting Off the Image and Sound Temporarily" p.62

• "Selecting Password Security Types" p.74