User’s Guide
Notations Used in This Guide • Safety indications The documentation and the projector use graphical symbols to show how to use the projector safely. Please understand and respect these caution symbols in order to avoid injury to persons or property. Warning This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
Contents 3 Notations Used in This Guide . . . . . . . . . . . . . . . . . . . . . . . . 2 Preparing the Projector Installing the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Introduction Projector Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Quick and Easy Set up, Projection, and Storage . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Connecting with a USB cable and projecting (USB Display) . . . . . . . .
Contents Selecting the Projection Quality (Selecting Color Mode) . . . . . . . . . . . . . . Setting Auto Iris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing the Aspect Ratio of the Projected Image . . . . . . . . . . . . . . . . . . Changing methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing the aspect mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 . . . . . . . . . . . . . . . . . . . . . . .
Contents 5 Reset Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 Replacing Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 Troubleshooting Using the Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 Problem Solving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Reading the Indicators . . . . . . . . . . . . . . . . . . . .
Contents Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 General Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 About Notations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 General Notice: . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction This chapter explains the projector's features and the part names.
Projector Features Quick and Easy Set up, Projection, and Storage • • • • Turn the projector on and off by simply plugging in or unplugging. Project onto large screens from a short distance. Make easy height adjustments with one lever. No cool down delay makes it easy to put away. 8 Horizontal keystone adjuster This allows you to quickly correct horizontal distortion in the projected image. This is useful if you cannot install the projector parallel to the screen. s "Correcting manually" p.
Projector Features Connect a USB storage device and project movies or images (PC Free) 9 Enlarge and project your files with the Document Camera Only EB-X21/EB-S21/EB-X17/EB-S17 are supported. You can project paper documents and objects using the optional Document Camera. You can connect USB storage devices or digital cameras to the projector and project saved images. By connecting to a computer and using the software supplied, you can make full use of the projector's capabilities.
Projector Features Connecting to a network and projecting images from the computer's screen You can project your computer's screen over a network by using EasyMP Network Projection. Sharing the projector over the network allows you to project data from different computers without changing the signal cable. Even if the projector is away from the computer, you can still project data over a network. You can find Easy Network Projection on the EPSON Projector Software CD-ROM.
Part Names and Functions All of the features in this guide are explained using illustrations of EB-X21 unless otherwise mentioned. 11 Front/Top EB-S21/EB-S17 Name A Air exhaust vent Function Exhaust vent for air used to cool the projector internally. Caution While projecting, do not put your face or hands near the air exhaust vent, and do not place objects that may become warped or damaged by heat near the vent. Hot air from the air exhaust vent could cause burns, warping, or accidents to occur.
Part Names and Functions Name 12 Function Name Function B A/V mute slide knob Slide the knob to open and close the A/V mute slide. N Lamp cover C Foot adjust lever Press the foot adjust lever to extend and retract the front adjustable foot. s "Adjusting the Image Position" p.45 Open when replacing the projector's lamp. s "Replacing the Lamp" p.121 O Lamp Cover Fixing Screw Screw to fix the lamp cover in place.
Part Names and Functions Rear 13 The ports vary depending on the model being used. Name EB-X21/EB-S21/EB-X17/EB-S17 EB-X25/EB-W22/EB-X22/EB-X20 Function A Power inlet Connects the power cord to the projector. s "From Installation to Projection" p.34 B S-Video port For S-video signals from video sources. C RS-232C port When controlling the device from a computer, connect it to the computer with an RS-232C cable. This port is for control use and should not normally be used.
Part Names and Functions Name 14 Function O LAN port (EB-X25/EBW22/EB-X22/EB-X20 only) Connects a LAN cable to connect to a network. P USB-B port • Connects the projector to a computer using a USB cable, and projects the images on the computer. s "Projecting with USB Display" p.36 • Connects the projector to a computer using a USB cable to use the Wireless Mouse function. s "Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse)" p.
Part Names and Functions Name 15 Function C Rear feet When setup on a surface such as a desk, turn to extend and retract to adjust the horizontal tilt. s "Adjusting the Horizontal Tilt" p.45 D Front adjustable foot When setup on a surface such as a desk, extend the foot to adjust the position of the image. s "Adjusting the Image Position" p.45 Control Panel Name Function A [Source Search] button Changes to the next input source that is sending an image.
Part Names and Functions Name 16 Function D [Help] button Displays and closes the Help screen which shows you how to deal with problems if they occur. s "Using the Help" p.103 E [Esc] button • Stops the current function. • If pressed when the Configuration menu is displayed, it moves to the previous menu level. s "Using the Configuration Menu" p.82 F [a][b] buttons or [Wide][Tele] buttons • For EB-X25/EB-W22/EB-X22/EB-X21/EB-X20/EBX17 [a] Decreases the volume. [b] Increases the volume.
Part Names and Functions Name 17 Function A Power button [t] Turns the projector power on or off. s "From Installation to Projection" p.34 B [Computer] button Each time you press the button, the input changes between images from the Computer1 port and the Computer2 port. C [Video] button Each time the button is pressed, the image cycles through the S-Video, Video, and HDMI ports. D Numeric buttons Enter the Password. s "Setting Password Protect" p.
Part Names and Functions Name N [A/V Mute] button 18 Function • Turns the video and audio on or off. s "Hiding the Image and Sound Temporarily (A/V Mute)" p.57 • You can change the Projection mode as follows by pressing the button for about five seconds. FrontWFront/Ceiling RearWRear/Ceiling O [Help] button Displays and closes the Help screen which shows you how to deal with problems if they occur. s "Using the Help" p.103 P [Freeze] button Images are paused or unpaused.
Part Names and Functions 19 Replacing the remote control batteries Caution If delays in the responsiveness of the remote control occur or if it does not operate after it has been used for some time, it probably means that the batteries are becoming flat. When this happens, replace them with new batteries. Have two AA size manganese or alkaline batteries ready. You cannot use other batteries except for the AA size manganese or alkaline.
Part Names and Functions Remote control operating range 20
Preparing the Projector This chapter explains how to install the projector and connect projection sources.
Installing the Projector 22 Installation Methods Warning The projector supports the following four different projection methods. Install the projector according to the conditions of the installation location. • Project images from in front of the screen. (Front projection) • Project images from behind a translucent screen. (Rear projec‐ tion) • Suspend the projector from the ceiling and project images from in front of a screen.
Installing the Projector Installation methods Install the projector as follows. 23 a • Install the projector so that it is parallel to the screen. If the projector is installed at an angle to the screen, keystone distortion occurs in the projected image. • See the following if you cannot install the projector parallel to the screen. s "Correcting Keystone Distortion" p.40 • See the following if you cannot install the projector on a level surface. s "Adjusting the Horizontal Tilt" p.
Installing the Projector 24 For EB-X25 16:10 Screen Size For EB-W22 150” 150” 100” 80” 100” 80” 50” 50” 4:3 Screen Size For EB-X22/EB-X21/EB-S21/EB-X20/EB-X17/EB-S17 150” 100” 80” 50”
Connecting Equipment 25 Illustrations in this section are of EB-X21. The port name, number, location, and connector orientation differ depending on the source being connected. Connecting a Computer To project images from a computer, connect the computer using one of the following methods. A When using the supplied computer cable Connect the computer's display output port to the projector's Computer port.
Connecting Equipment 26 Connecting Image Sources To project images from DVD players or VHS video and so on, connect to the projector using one of the following methods. A When using a commercially available video or S-video cable Connect the video output port on the image source to the projector's Video port. Or, connect the S-video output port on the image source to the projector's S-Video port.
Connecting Equipment 27 Attention If the orientation or shape of the plug differs, do not try to force it in. The device could be damaged or could malfunction. a • You can change the audio input source in Audio Output. s Extended - A/V Settings - Audio Output p.89 • If the source you want to connect to has an unusually shaped port, use the cable supplied with the device or an optional cable to connect to the projectors.
Connecting Equipment 28 Attention • • • • If you use a USB hub, the connection may not operate correctly. Devices such as digital cameras and USB devices should be connected to the projector directly. When connecting and using a USB-compatible hard disk, make sure you connect the AC adaptor supplied with the hard disk. Connect a digital camera or hard disk to the projector using the USB cable provided with the device. Use a USB cable less than three meters in length.
Connecting Equipment a 29 • If you set Standby Mode to Communication On, you can perform the following operations even if the projector is off. - Outputting images to an external monitor (only when A/V Output is set to Always On). - Outputting audio from an externally connected speaker (audio from USB or LAN cannot be output). s ECO - Standby Mode p.99 s Extended - A/V Settings p.89 • Only analog RGB signals from the Computer1 port can be output to an external monitor.
Connecting Equipment Connecting a LAN Cable Only EB-X25/EB-W22/EB-X22/EB-X20 are supported. Connect a LAN port on network hubs or other equipment to the projector's LAN port with a commercially available 100BASE-TX or 10BASE-T LAN cable. By connecting a computer to the projector over a network, you can project images and check the status of the projector. a To prevent malfunctions, use a category 5 or higher shielded LAN cable.
Connecting Equipment Installing the Wireless LAN Unit 31 b Connect the wireless LAN unit to the USB-A port. c Attach the wireless LAN unit cover, and secure it in place with the screw. Only EB-X21/EB-S21/EB-X17/EB-S17 are supported. By installing the optional Wireless LAN unit, you can project a computer screen over a network. Connect the wireless LAN unit to the projector's USB-A port.
Connecting Equipment Installing the Quick Wireless Connection USB Key When installing the optional Quick Wireless Connection USB Key, you need to remove the Wireless LAN unit first, and then connect the Quick Wireless Connection USB Key to the USB-A port. a Turn on the projector, and then press the [LAN] button on the remote control. The LAN standby screen is displayed. b Check that the SSID and IP address information are displayed on the LAN standby screen, and then remove the Wireless LAN unit.
Basic Usage This chapter explains how to project and adjust images.
Projecting Images From Installation to Projection This section explains the procedure for connecting the projector to a computer with the computer cable and projecting images. Attention Be sure to connect the cable of the source to the projector first, and then connect the power cord to the projector. 34 c d e f Turn on the projector. Open the A/V mute slide. Turn on your computer. Change the computer's screen output. When using a laptop computer, you need to change the screen output from the computer.
Projecting Images 35 Automatically Detect Input Signals and Change the Projected Image (Source Search) Press the [Source Search] button to project images from the port currently receiving an image. Using the remote control Using the control panel For EB-X21/EB-S21/EB-X17/EB-S17 For EB-X25/EB-W22/EB-X22/EB-X20 When two or more image sources are connected, press the [Source Search] button until the target image is projected.
Projecting Images 36 Switching to the Target Image by Remote Control You can change directly to the target image by pressing the following buttons on the remote control. Remote control Projecting with USB Display You can use a USB cable to connect the projector to a computer to project images from the computer. You can project images and send audio with one USB cable.
Projecting Images Hard Disk Space 20 MB or more Display Resolution of no less than 640x480 and no higher than 1600x1200. Display color in 16-bit color or greater *1 Service Pack 4 only *2 Except for Service Pack 1 37 Connecting for the first time The first time you connect the projector and the computer using the USB cable, the driver needs to be installed. The procedure is different for Windows and Mac OS. a For Mac OS • You do not need to install the driver the next time you connect.
Projecting Images c d Computer images are projected. It may take a while before computer images are projected. Until computer images are projected, leave the equipment as it is and do not disconnect the USB cable or turn off the power to the projector. Disconnect the USB cable when you finish projection. When disconnecting the USB cable, there is no need to use Safely Remove Hardware. a • If it is not installed automatically, double-click My Computer - EPSON_PJ_UD - EMP_UDSE.EXE on your computer.
Projecting Images Uninstalling For Windows 2000 a b c d Click Start, select Settings, and then click Control Panel. Double-click Add/Remove Programs. Click Change or Remove Programs. Select Epson USB Display and click Change/Remove. For Windows XP a b c Click Start, and then click Control Panel. Double-click Add or Remove Programs. Select Epson USB Display and click Remove. For Windows Vista/Windows 7 a b c Click Start, and then click Control Panel. Click Uninstall a program under Programs.
Adjusting Projected Images Correcting Keystone Distortion 40 • Correcting manually (Quick Corner) Manually correct the four corners independently. You can correct keystone distortion using one of the following methods. • Correcting automatically (Auto V-Keystone) Automatically corrects vertical keystone distortion. • Correcting manually (H-Keystone Adjuster) Manually corrects horizontal keystone distortion using the horizontal keystone adjuster.
Adjusting Projected Images Correcting automatically 41 Correcting manually You can manually correct keystone distortion. Auto V-Keystone When the projector detects any movement, for example when it is installed, moved, or tilted, it automatically corrects vertical keystone distortion. This function is called Auto V-Keystone. When the projector remains still for about two seconds after it detects movement, it displays a screen for adjustment and then automatically corrects the projected image.
Adjusting Projected Images 42 H/V-Keystone Manually correct distortion in the horizontal and vertical directions independently. a Press the [w] or [v] button on the control panel during projection to display the Keystone screen. b Press the following buttons to correct keystone distortion. Press the [w] or [v] button to correct vertical distortion. a You can also set H/V-Keystone from the Configuration menu. s Settings - Keystone - H/V-Keystone p.
Adjusting Projected Images b Select Keystone from Settings. c Select Quick Corner, and then press the [ d Using the [ ], [ 43 ] button. ], [ ], and [ ] buttons on the remote control, or the [w], [v], [a], and [b] buttons (or the [Wide]/[Tele] buttons) on the control panel, select the corner to correct, and then press the [ ] button.
Adjusting Projected Images e Using the [ ], [ ], [ ], and [ ] buttons on the remote control, or the [w], [v], [a], and [b] buttons (or the [Wide]/[Tele] buttons) on the control panel, correct the position of the corner. When you press the [ displayed. 44 a If the [Esc] button is held down for about two seconds while the corner selection screen from step 4 is displayed, the following screen is displayed. ] button, the screen shown in step 4 is If the message "Cannot adjust any further.
Adjusting Projected Images EB-X25/EB-W22/EB-X22 /EB-X21/EB-X20/EB-X17 45 Adjusting the Horizontal Tilt Extend and retract the rear feet to adjust the projector's horizontal tilt. EB-S21/EB-S17 A Extend the rear foot. B Retract the rear foot. Adjusting the Image Position Press the foot adjust lever to extend the front adjustable foot. You can adjust the position of the image by tilting the projector up to 12 degrees. Correcting the Focus You can correct the focus using the focus ring.
Adjusting Projected Images Adjusting the Volume You can adjust the volume using one of the following methods. • Press the [Volume] button on the control panel or the remote control to adjust the volume. [a] Decreases the volume. [b] Increases the volume. Using the remote control Using the control panel (EB-X25/EB-W22/EB-X22/EB-X21/EB-X20/EB-X17 only) • Adjust the volume from the Configuration menu. s Settings - Volume p.
Adjusting Projected Images 47 Each time you press the [Color Mode] button, the Color Mode name is displayed on the screen and the Color Mode changes. b Select Auto Iris from Image. c Select Normal or High Speed. Remote control a You can set Color Mode from the Configuration menu. s Image - Color Mode p.85 Setting Auto Iris a By automatically setting the luminance according to the brightness of the displayed image, it lets you enjoy deep and rich images. a Press the [Menu] button.
Adjusting Projected Images 48 Available aspect modes vary depending on the image signal currently being projected. Changing methods Each time you press the [Aspect] button on the remote control, the aspect mode name is displayed on the screen and the aspect ratio changes. Remote control a You can set the aspect ratio from the Configuration menu. A B C D E Normal or Auto 16:9 Full Zoom Native s Signal - Aspect p.
Adjusting Projected Images 49 Projecting images from a computer The following shows projection examples for each aspect mode. For EB-W22 Aspect Mode Input Signal XGA 1024X768(4:3) A 4:3 B 16:9 Projecting images from the HDMI port (for EB-X25/EB-X22/EB-X21/EB-S21/EB-X20/ EB-X17/EB-S17) Normal 16:9 Each time the Aspect button is pressed, the aspect mode changes in the order Auto, 4:3, and 16:9.
Adjusting Projected Images 50 For EB-X25/EB-X22/EB-X21/EB-S21/EB-X20/EB-X17/EB-S17 Aspect Mode Input Signal XGA 1024X768(4:3) WXGA 1280X800(16:10) Normal 4:3 16:9 a If parts of the image are missing, set the Resolution setting to Wide or Normal from the Configuration menu, according to the size of the computer panel. s Signal - Resolution p.
Useful Functions This chapter explains useful tips for giving presentations, and the Security functions.
Projection Functions Projecting Without a Computer (PC Free) Only EB-X21/EB-S21/EB-X17/EB-S17 are supported. 52 Type File Type (Ex‐ tension) Notes Movie .avi • Cannot project images with a resolution greater than 1280 x 720. • The audio format can only playback linear PCM and ADPCM. By connecting a USB storage device such as a USB flash drives or a USB hard disk to the projector, you can project the files stored on the device without using a computer. This function is called PC Free.
Projection Functions 53 PC Free operating methods Although the following steps are explained based on the remote control, you can perform the same operations from the control panel. Starting PC Free a • You can also insert a memory card into a USB card reader and then connect the reader to the projector. However, some commercially available USB card readers may not be compatible with the projector.
Projection Functions Projecting images a 54 Rotating images Press the [ ], [ ], [ ], or [ ] buttons to select the file or folder you want to project. You can rotate the played images in 90˚ increments. The rotating function is also available during Slideshow. a b a While projecting, press the [ ] or [ ] button.
Projection Functions 55 Projecting the selected image Attention Do not disconnect the USB storage device while it is being accessed. PC Free may not operate correctly. a a Start PC Free. The file list screen is displayed. Press the [ ][ ] buttons to move to the next or previous image file. s "Starting PC Free" p.53 b Press the [ ], [ ], [ ], and [ ] buttons to select the image file you want to project. d To finish projecting, perform one of the following operations.
Projection Functions Projecting image files in a folder in sequence (Slideshow) You can project the image files in a folder in sequence, one at a time. This function is called Slideshow. Use the following procedure to run Slideshow. a a 56 a If Screen Switching Time on the Option screen is set to No, files do not change automatically when you select Play Slideshow. Press the [ ] button, the [ ] button, or the []] button to continue to the next file.
Projection Functions 57 Image file display settings and Slideshow operation settings You can set the file display order and Slideshow operations on the Option screen. a Select Option at the bottom of the file list screen, and then press the [ ] button. b When the following Option screen is displayed, set each of the items. Select any of the options as necessary and press the [ ] button. The following table shows the details for each item.
Projection Functions 58 Each time you press the [A/V Mute] button or open/close the lens cover, A/V Mute turns on or off. Remote control Projector Freezing the Image (Freeze) When Freeze is activated on moving images, the frozen image continues to project on the screen, so you can project a moving image one frame at a time like a still photo.
Projection Functions 59 a You can select the shape of the pointer icon from the Configuration menu. s Settings - Pointer Shape p.88 Enlarging Part of the Image (E-Zoom) a Display the Pointer. Each time you press the [Pointer] button, the pointer appears or disappears. This is useful when you want to expand images to see them in greater detail, such as graphs and tables. Remote control a b Move the Pointer icon ( ).
Projection Functions b Move the Cross ( 60 ) to the area of the image that you want to enlarge. Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse) Remote control You can control the computer's mouse pointer from the projector's remote control. This function is called Wireless Mouse. The following operating systems are compatible with Wireless Mouse.
Projection Functions 61 Once set, the mouse pointer can be controlled as follows. a Moving the mouse pointer [ ][ ][ ][ ] buttons: • When any pair of adjacent [ ], [ ], [ ], or [ ] buttons are pressed at the same time, the pointer can be moved diagonally. • If the mouse button settings are set to reverse on the computer, the operation of the remote control buttons will also be reversed. Moves the mouse pointer. • The Wireless Mouse function does not work under the following conditions.
Projection Functions b Select User's Logo from Extended. 62 d Move the box to select the part of the image to use as the User's Logo. You can perform the same operations from the projector's control panel. Remote control a • When User's Logo Protect from Password Protect is set to On, a message is displayed and the User's Logo cannot be changed. You can make changes after setting User's Logo Protect to Off. s "Managing Users (Password Protect)" p.
Projection Functions g 63 When the message "Save this image as the User's Logo?" is displayed, select Yes. The image is saved. After the image has been saved, the message "Completed." is displayed. a • When a User's Logo is saved, the previous User's Logo is erased. • It takes a while to save. Do not operate the projector or any connected equipment while it is saving, otherwise malfunctions may occur. Saving User Pattern You can save the image that is currently being projected as a User Pattern.
Projection Functions d When "Do you want to use the currently projected image as the User Pattern?" is displayed, select Yes. e When you press the [Enter] button, the message "Do you save this image as the User Pattern?" is displayed. Then, select Yes. The image is saved. After the image has been saved, the message "The User Pattern setting is complete". is displayed. a • Once a User Pattern has been saved, User Pattern cannot be returned to the factory default.
Security Functions The projector has the following enhanced security functions. • Password Protect You can limit who can use the projector. • Control Panel Lock You can prevent people changing the settings on the projector without permission. s "Restricting Operation (Control Panel Lock)" p.67 • Anti-Theft Lock The projector is equipped with the following anti-theft security device. s "Anti-Theft Lock" p.
Security Functions a 66 • If Password Protect is already activated, you must enter the password. If the password is entered correctly, the Password Protect setting menu is displayed. s "Entering the Password" p.66 (2) (3) • When the password is set, stick the password protect sticker in a visible position on the projector as a further theft deterrent. s Password Protect Sticker b When the message "Change the password?" is displayed, select Yes and then press the [ ] button.
Security Functions 67 Restricting Operation (Control Panel Lock) Perform one of the following to lock the operation buttons on the control panel. • Full Lock All of the buttons on the control panel are locked. You cannot perform any operations from the control panel, including turning the power on or off. When you enter the correct password, Password Protect is temporarily released.
Security Functions b Select Control Panel Lock from Settings. 68 a You can release the control panel lock by one of the following two methods. • Select Off from Control Panel Lock. s Settings - Control Panel Lock p.88 • Press and hold down the [ ] button on the control panel for about seven seconds, a message is displayed and the lock is released. c Select either Full Lock or Partial Lock according to your purpose. d Select Yes when the confirmation message is displayed.
Security Functions Anti-Theft Lock The projector is equipped with the following types of anti-theft security devices. • Security slot The security slot is compatible with the Microsaver Security System manufactured by Kensington. See the following for more details on the Microsaver Security System. s http://www.kensington.com/ • Security cable installation point A commercially available theft-prevention wire lock can be passed through the installation point to secure the projector to a desk or pillar.
Monitoring and Controlling EasyMP Monitor By using EasyMP Monitor, you can display the status of multiple Epson network projectors on your computer. This allows you to check the status of the projectors and control them from your computer. The Message Broadcasting plugin for EasyMP Monitor can be used to simultaneously send JPEG files to registered projectors. You can download EasyMP Monitor from the following Web site. http://www.epson.com Download the Message Broadcasting plugin from the Web site.
Monitoring and Controlling a b 71 Start a Web browser on the computer. Enter the IP address of the projector in the address input box of the Web browser, and press the Enter key on the computer's keyboard. The Web Control screen is displayed. When Web Control Password is set from the Configuration menu, the password entry screen is displayed. c c The Web Remote screen is displayed. Enter the user ID and password. Enter "EPSONWEB" as the user ID. The initial password is "admin".
Monitoring and Controlling Name 72 Function E [A/V Mute] button Turns the video and audio on or off. s "Hiding the Image and Sound Temporarily (A/V Mute)" p.57 F [Page] buttons [[][]] Changes pages in files such as PowerPoint files when using the following projection methods. • When using the Wireless Mouse function s "Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse)" p.60 • When using USB Display s "Projecting with USB Display" p.
Monitoring and Controlling The details of the problem are listed line by line. The messages are listed below. • Internal error • Fan related error • Sensor error • Lamp cover is open • Lamp timer failure 73 a • SNMP should be managed by a network administrator or someone who is familiar with the network. • To use the SNMP function to monitor the projector, you need to install the SNMP manager program on your computer. • The SNMP Agent for this projector complies with version 1 (SNMPv1).
Monitoring and Controlling 74 Item A/V Mute On/Off A/V Mute selection Command RGB SOURCE 21 Component SOURCE 24 HDMI SOURCE 30 Video SOURCE 41 S-Video SOURCE 42 USB Display SOURCE 51 USB SOURCE 52 LAN SOURCE 53 On MUTE ON Off MUTE OFF Black MSEL 00 Blue MSEL 01 Logo MSEL 02 • Projector input port name: RS-232C (PC serial cable) Add a Carriage Return (CR) code (0Dh) to the end of each command and transmit.
Monitoring and Controlling 75 About PJLink (EB-X25/EB-W22/EB-X22/EB-X20 Only) PJLink Class1 was established by the JBMIA (Japan Business Machine and Information System Industries Association) as a standard protocol for controlling network-compatible projector's as part of their efforts to standardize projector control protocols. The projector complies with the PJLink Class1 standard established by the JBMIA. See the Network menu for more information on PJLink network settings. s "Network Menu" p.
Monitoring and Controlling 76 • Monitoring and control with application software You can use Crestron RoomView Express or Crestron RoomView Server Edition provided by Crestron to monitor devices in the system, to communicate with the help desk, and to send emergency messages. See the following Web site for details. http://www.crestron.com/getroomview ® ® ® This manual describes how to perform operations on your computer using a Web browser. a a b Start a Web browser on the computer.
Monitoring and Controlling Button 77 Function Button Turns the video and audio on or off. s "Hiding the Image and Sound Temporarily (A/V Mute)" p.57 A/V Mute B Switch to the image from the selected input source. To display input sources that are not shown in Source List, click (a) or (b) to scroll up or down. You can change the source name if necessary. C You can perform the following operations when you click the buttons.
Monitoring and Controlling 78 Item A Crestron Control Make settings for Crestron central controllers. ® B Projector The following items can be set. Item Select the Enabled check box to use DHCP. You cannot enter an IP address if DHCP is enabled. IP Address Enter the IP address to assign to the currently connected projector. Subnet Mask Enter a subnet mask for the currently connected projector. Default Gateway Enter the gateway address for the currently connected projector.
Monitoring and Controlling Item 79 Function New Password Enter the new password when changing the password to open the operation window. (The name can contain up to 26 single-byte alphanumeric characters.) Confirm Enter the same password as you entered in New Password. If the passwords are not the same, an error is displayed. Send Click this button to confirm the changes made to the User Password.
About Event ID 80 Check the numbers and then apply the following countermeasures. If you cannot resolve the problem, contact your network administrator, or contact your local dealer or the nearest address provided in the Epson Projector Contact List. s Epson Projector Contact List Event ID Cause Remedy 0432 0435 Failed to startup EasyMP Network Projection. Restart the projector. 0434 0481 0482 0485 Network communication is unstable.
Configuration Menu This chapter explains how to use the Configuration menu and its functions.
Using the Configuration Menu This section explains how to use the Configuration menu. Although steps are explained using the remote control as an example, you can perform the same operations from the control panel. Check the guide under the menu for the available buttons and their operations. a b 82 c Select a submenu item. d Change settings. e Press the [Menu] button to finish making settings. Display the Configuration menu screen. Select a top menu item.
List of Functions 83 Top Menu Name Configuration Menu Table Submenu Name Video Signal Auto, NTSC, NTSC4.43, PAL, M-PAL, N-PAL, PAL60, and SECAM Aspect Normal, Auto, 4:3, 16:9, Full, Zoom, and Native Overscan Auto, Off, 4%, and 8% Image Processing Fine, Fast Keystone H/V-Keystone and Quick Corner - Settable items vary depending on the model being used and the image signal and source being projected. Top Menu Name Image menu s p.85 Signal menu s p.
List of Functions Top Menu Name s p.99 Info menu s p.100 Reset menu s p.101 84 Submenu Name Items or Setting Values Light Optimizer On and Off Sleep Mode On and Off Sleep Mode Timer 0 - 30 Lens Cover Timer On and Off A/V Mute Timer On and Off Standby Mode Communication On and Communication Off Network menu Top Menu Name Basic menu s p.
List of Functions Top Menu Name 85 Submenu Name Setting Values IP Settings Wired LAN menu (EB-X25/EB-W22/ EB-X22/EB-X20 only) IP Address Display s p.96 DHCP, IP Address, Subnet Mask, and Gateway Address Mail menu s p.97 Mail Notification On and Off SMTP Server - Port Number - s "Automatically Detect Input Signals and Change the Projected Image (Source Search)" p.35 On and Off Address 1 Setting, Ad‐ dress 2 Setting, and Ad‐ dress 3 Setting Others menu s p.
List of Functions Submenu 86 Function Color Adjust‐ ment (This item cannot be selected if Color Mode is set to sRGBg.) You can adjust the color strength for Red, Green, and Blue individually. Auto Iris (This item can be set only if Color Mode is set to Dynamic or Theatre.) Set to Normal or High Speed to adjust the iris to obtain the optimum light for images being projected. Select High Speed to make faster iris corrections to match the speed of the scene. The setting is stored for each Color Mode.
List of Functions Submenu Progressive 87 Function (When a component video or RGB video is being input, this setting can only be adjusted if the signal being input is an interlaced signal (480i/576i/1080i). This cannot be set when a digital RGB signal is being input.) Interlaceg (i) signal is converted to Progressiveg (p). (IP conversion) Off: Ideal for images with a large amount of movement. Video: Ideal for general video images. Film/Auto: This is ideal for movie films, computer graphics, and animation.
List of Functions 88 Submenu Settings Menu Pointer Shape Function You can select the shape of the pointer. Pointer 1: Pointer 2: Pointer 3: s "Pointer Function (Pointer)" p.58 Submenu Function Keystone You can correct keystone distortion. • When H/V-Keystone is selected: Adjust V-Keystone and H-Keystone to correct horizontal and vertical keystone distortion. You can also set H-Keystone Adjuster and Auto VKeystone to On or Off.
List of Functions 89 Submenu Pattern Function Pattern Display: Display a pattern. Pattern Type: You can select from Patterns 1 to 4 or User Pattern. Patterns 1 to 4 display projection lines such as ruled lines or a grid. Pattern 1: Pattern 2: Pattern 3: Pattern 4: User Pattern: Captures a user pattern. s "Saving User Pattern" p.63 Test Pattern: When the projector is set up, a test pattern is displayed so that you can adjust the projection status without connecting equipment.
List of Functions Submenu Projection Operation 90 Function Select from one of the following projection methods depending on how the projector is installed. Front, Front/Ceiling, Rear, and Rear/Ceiling You can change the setting as follows by pressing down the [A/V Mute] button on the remote control for about five seconds. FrontWFront/Ceiling RearWRear/Ceiling s "Installation Methods" p.22 Submenu A/V Settings Function A/V Output: (This item can be set only if Standby Mode is set to Communication On.
List of Functions 91 Network Menu When Network Protect is set to On in Password Protect, a message is displayed and the network settings cannot be changed. Set Network Protect to Off and then configure the network. s "Setting Password Protect" p.65 Submenu Function Net. Info. Wired LAN (EB-X25/EB-W22/ EB-X22/EB-X20 only) Displays the following network setting status information.
List of Functions 92 Yes: Saves the settings and exits the Network menu. No: Does not save the settings and exits the Network menu. Cancel: Continues displaying the Network menu. Soft keyboard operations The Network menu contains items that require input of alphanumerics during setup. In this case, the following software keyboard is displayed. Press the [ ][ ][ ][ ] buttons on the remote control or the [w][v] [a][b] buttons (or the [Wide][Tele]) on the control panel.
List of Functions 93 Basic menu Submenu Projector Key‐ word Function When set to On, you have to enter the keyword when you try to connect the projector to a computer via a network. As a result, you can prevent presentations from being interrupted by connections from other computers. Normally this should be set to On.
List of Functions Submenu 94 Function Connection Mode Set the connection mode to use when connecting the projector and a computer via a wireless LAN. If you select Quick, a small network is created automatically by the projector and computer. It is used with EasyMP Network Projection. If SSID Auto Setting is set to On, the projector becomes an easy access point; if it is set to Off, the network is created in Ad hoc modeg. If you select Advanced, the connection is established in Infrastructure modeg.
List of Functions 95 Security menu (EB-X21/EB-S21/EB-X17/EB-S17 only) Available when the Wireless LAN unit is installed. Submenu Submenu Function Encryption Key 1/Encryption Key 2/Encryption Key 3/Encryption Key 4 You can enter the key used for WEP encryption. Enter the key in single-byte characters following instructions from the network administrator for the network in which the projector participates.
List of Functions • WEP Data is encrypted with a code key (WEP key). This mechanism prevents communication unless the encrypted keys for the access point and the projector match. 96 Wired LAN menu (EB-X25/EB-W22/EB-X22/EB-X20 only) • WPA This is an encryption standard that improves security which is a weak point of WEP. Although there are multiple kinds of WPA encryption methods, this projector uses TKIP and AES. WPA also includes user authentication functions.
List of Functions Submenu IP Address Dis‐ play 97 Function To prevent the IP address from being displayed on Network Info in the Network Menu and on the LAN Standby screen, set this to Off. Mail menu When this is set, you receive an email notification if a problem or warning occurs in the projector. s "Using the Mail Notification Function to Report Problems" p.72 Submenu Function Mail Notification Set to On to send an email to the preset addresses when a problem or warning occurs with a projector.
List of Functions 98 Others menu Submenu Function SNMP Set to On to monitor the projector using SNMP. To monitor the projector, you need to install the SNMP manager program on your computer. SNMP should be managed by a network administrator. The default value is Off. Trap IP Address 1/Trap IP Ad‐ dress 2 You can register up to two IP addresses for the SNMP trap notification destination. You can enter a number from 0 to 255 in each field of the address.
List of Functions 99 Reset menu ECO Menu Resets all of the network settings. Submenu Reset network settings. When you make ECO menu settings, the projector performs functions to save power. When power saving settings have been enabled, a leaf icon is displayed next to each submenu. Function To reset all of the Network settings, select Yes. Submenu Function Power Consump‐ tion You can set the lamp brightness to one of two settings.
List of Functions Submenu Sleep Mode 100 Function When set to On, this automatically stops projection when no image signal is being input and no operations are carried out for a specified length of time. Also, if no image signal is input for approximately five minutes, the lamp dims until the power turns off. When an image signal is input, the projector returns to normal operating status.
List of Functions Submenu 101 Function Sync Info You can display the image signal information. This information may be needed if service is required. Video Signal You can display the settings for Video Signal in the Signal menu. Status This is information about errors that have occurred on the projector. This information may be needed if service is required. Serial Number Displays the projector's serial number. Version Displays the projector's firmware version.
Troubleshooting This chapter explains how to identify problems and what to do if a problem is found.
Using the Help 103 If a problem occurs with the projector, the Help screen is displayed to assist you by pressing the Help button. You can solve problems by answering the questions. a c Confirm the selection. Using the remote control Using the control panel Press the [Help] button. The Help screen is displayed. Using the remote control Using the control panel Questions and solutions are displayed as shown on the screen below. Press the [Help] button to exit the Help. b Select a menu item.
Problem Solving 104 If you are having a problem with the projector, first check the projector's indicators and refer to "Reading the Indicators" below. See the following if the indicators do not show clearly what the problem might be. s "When the Indicators Provide No Help" p.108 Reading the Indicators The projector is provided with the following four indicators that indicate the operating status of the projector. A B C D Power indicator Indicates the projector's status.
Problem Solving 105 Indicators Power supply Status Explanation Status Blue - Lit Blue - Lit Cool down status This is the status immediately after turning off the projector. In this status, all buttons are disabled. Normal status The projector is projecting. Refer to the following table to see what the indicators mean and how to remedy problems that they indicate. If all indicators are off, check that the power cord is connected correctly and that the power is being supplied normally.
Problem Solving 106 Indicators Power sup‐ ply Off Status Blue - Flash‐ ing Lamp Orange - Lit Cause Remedy or Status Tempera‐ ture Off Lamp Error Lamp Failure Check the following two points. • Take out the lamp and check if it is cracked. s "Replacing the Lamp" p.121 • Clean the air filter. s "Cleaning the Air Filter" p.119 If the lamp is not cracked: Reinstall the lamp and plug in the power cord.
Problem Solving 107 Indicators Power sup‐ ply Status Lamp Cause Tempera‐ ture Replace Lamp Blue - Flash‐ ing a State de‐ pendant in‐ dication Orange Flashing Remedy or Status State de‐ pendant in‐ dication Replace it with a new lamp. s "Replacing the Lamp" p.121 If you continue to use the lamp after the replacement period has passed, the possibility that the lamp may explode increases. Replace it with a new lamp as soon as possible.
Problem Solving 108 When the Indicators Provide No Help If any of the following problems occur and the indicators do not offer a solution, refer to the pages given for each problem. Problems Relating to Images s p.109 • No images appear Projection does not start, the projection area is completely black, or the projection area is completely blue. • Moving images are not displayed Moving images being projected from a computer appear black and nothing is projected. s p.
Problem Solving 109 Problems Relating to Images No images appear Check Remedy Did you press the [t] power button? Press the [t] power button to turn the power on. Are the indicators switched off? The power cord is not connected correctly or power is not being supplied. Connect the projector's power cord correctly. s "From Installation to Projection" p.34 Check that your electrical outlet or power source is functioning correctly.
Problem Solving 110 Moving images are not displayed Check Remedy Is the computer's image signal being output to the LCD and the monitor? (Only when projecting images from a laptop computer or a computer with a built-in LCD screen) Change the image signal from the computer to external output only. Check your computer's documentation, or contact the computer's manufacturer.
Problem Solving 111 The message "No Signal" is displayed Check Remedy Are the cables connected correctly? Check that all the cables required for projection are securely connected. s "From Installation to Projection" p.34 Is the correct port selected? Change the image by pressing the [Source Search] button on the remote control or the control panel. s "Automatically Detect Input Signals and Change the Projected Image (Source Search)" p.
Problem Solving 112 Check Remedy Is the keystone adjustment value too large? Lower the projection angle to reduce the amount of keystone correction. s "Adjusting the Image Position" p.45 Has condensation formed on the lens? If the projector is suddenly taken from a cold environment to a warm environment, or if sudden ambient temperature changes occur, condensation may form on the surface of the lens, and this may cause the images to appear fuzzy.
Problem Solving 113 The image is truncated (large) or small, the aspect is not suitable, or the image has been reversed Check Remedy Is a wide panel computer image being projected? (Only when projecting computer images) Change the setting according to the signal for the connected equipment. s Signal - Resolution p.86 Is the image still being enlarged by E-Zoom? Press the [Esc] button on the remote control to cancel E-Zoom. s "Enlarging Part of the Image (E-Zoom)" p.
Problem Solving 114 Check Remedy Is the image brightness adjusted correctly? Adjust the Brightness setting from the Configuration menu. s Image - Brightness p.85 Are the cables connected correctly? Check that all the cables required for projection are securely connected. Check that no cables are disconnected and that there are no poor contacts in the cables. s "Connecting Equipment" p.25 Is the contrastg adjusted correctly? Adjust the Contrast setting from the Configuration menu.
Problem Solving 115 Problems when Projection Starts The projector does not turn on Check Remedy Did you press the [t] power button? Press the [t] power button to turn the power on. Are the indicators switched off? The power cord is not connected correctly or power is not being fully supplied. Disconnect and then reconnect the power cord. s "From Installation to Projection" p.34 Check that your electrical outlet or power source is functioning correctly.
Problem Solving 116 Check Remedy Is A/V Mute active? Press the [A/V Mute] button on the remote control to cancel A/V Mute. s "Hiding the Image and Sound Temporarily (A/V Mute)" p.57 Is the audio cable's specification "No resistance"? When using a commercially available audio cable, make sure it is labeled "No resistance". Is it connected with an HDMI cable? If no audio is output when connecting via an HDMI cable, set the connected equipment to PCM output.
Problem Solving 117 I want to change the language for messages and menus Check Change the Language setting. Remedy Adjust the Language setting from the Configuration menu. s Extended - Language p.89 Mail is not received even if a problem occurs in the projector Check Remedy Is Standby Mode set to Communication On? To use the Mail Notification function when the projector is in standby, set Communication On in Standby Mode from the Configuration menu. s ECO - Standby Mode p.
Maintenance This chapter provides information on maintenance procedures to ensure the best level of performance from the projector for a long time to come.
Cleaning You should clean the projector if it becomes dirty or if the quality of projected images starts to deteriorate. Caution Turn off the projector's power before cleaning. Otherwise, it could cause an electric shock. Cleaning the Projector's Surface Clean the projector's surface by wiping it gently with a soft cloth.
Cleaning a 120 • If a message is frequently displayed, even after cleaning, it is time to replace the air filter. Replace it with a new air filter. s "Replacing the Air Filter" p.124 • It is recommended that you clean these parts at least once every three months. Clean them more often than this if using the projector in a particularly dusty environment.
Replacing Consumables This section explains how to replace the lamp and the air filter. 121 • The projected image gets darker or starts to deteriorate. Attention Replacing the Lamp Lamp replacement period It is time to replace the lamp when: • The following message is displayed. "Time to replace the lamp. Please contact your Epson projector reseller or visit www.epson.com to purchase.
Replacing Consumables 122 Warning • When replacing the lamp because it has stopped illuminating, there is a possibility that the lamp may be broken. If replacing the lamp of a projector which has been installed on the ceiling, you should always assume that the lamp is cracked, and you should stand to the side of the lamp cover, not underneath it. Remove the lamp cover gently. Be careful when removing the lamp cover as shards of glass may fall out and could cause an injury.
Replacing Consumables d 123 e Install the new lamp. f Replace the lamp cover. Insert the new Lamp along the guide rail in the correct direction so that it fits in place, push in firmly, and once it is fully inserted tighten the two screws. Grip the raised section of the old lamp and remove it. If the Lamp is cracked, replace it with a new lamp, or contact your local dealer for further advice.
Replacing Consumables 124 Replacing the Air Filter Air filter replacement period If the message is displayed frequently even though the air filter has been cleaned, replace the air filter. How to replace the air filter The air filter can be replaced even when the projector is suspended from a ceiling. Attention • Make sure you install the lamp securely. If the lamp cover is removed, the lamps turn off automatically as a safety precaution.
Replacing Consumables 125 e Close the air filter cover. a d Install the new air filter. Slide the air filter from the outside and press in until it firmly clicks into place. Dispose of used air filters properly in accordance with your local regulations.
Appendix
Optional Accessories and Consumables The following optional accessories and consumables are available. Please purchase these products as and when needed. The following list of optional accessories and consumables is current as of: May 2013. Details of accessories are subject to change without notice and availability may vary depending on the country of purchase. 127 53" portable screen 64" portable screen ELPSC30 ELPSC31 Portable magnetic screens.
Screen Size and Projection Distance 128 A Projection Distance (For EB-X25) 4:3 Screen Size Minimum (Wide) to Maximum (Tele) B 60" 120x91 171 - 206 -10 80" 160x120 229 - 275 -13 100" 200x150 287 - 345 -16 150" 300x230 432 - 519 -24 200" 410x300 577 - 693 -32 250" 510x380 722 - 867 -40 300" 610x460 867 - 1041 -48 Unit: cm A 16:9 Screen Size A Projection distance B Distance from the center of the receiver's lens to the base of the screen (or to the top of the screen, if susp
Screen Size and Projection Distance 129 Projection Distance (For EB-X22/EB-X21/EB-X20/ EB-X17) A 4:3 Screen Size Minimum (Wide) to Maximum (Tele) B 50" 100x76 150 - 180 -8 60" 120x91 180 - 217 -10 80" 160x120 241 - 290 -14 100" 200x150 302 - 363 -17 150" 300x230 454 - 546 -25 200" 410x300 607 - 729 -34 250" 510x380 759 - 912 -42 300" 610x460 912 - 1095 -51 Unit: cm A 16:9 Screen Size A Projection distance B Distance from the center of the receiver's lens to the base of
Screen Size and Projection Distance 130 A Projection Distance (For EB-W22) 4:3 Screen Size Minimum (Wide) to Maximum (Tele) B 60" 120x91 190 - 229 -8 70" 142x107 222 - 267 -10 80" 160x120 255 - 306 -11 100" 200x150 319 - 383 -14 150" 300x230 480 - 577 -20 200" 410x300 641 - 770 -27 280" 570x430 898 - 1079 -38 Unit: cm A 16:9 Screen Size A Projection distance B Distance from the center of the receiver's lens to the base of the screen (or to the top of the screen, if suspen
Screen Size and Projection Distance 131 Unit: cm A 16:10 Screen Size Minimum (Wide) to Maximum (Tele) B 33" 71x44 91 - 110 -4 35" 76x47 97 - 117 -4 40" 86x54 111 - 134 -5 50" 110x67 139 - 168 -6 60" 130x81 168 - 202 -7 80" 170x110 225 - 270 -10 100" 220x130 281 - 338 -12 150" 320x200 424 - 509 -18 200" 430x270 566 - 680 -24 320" 690x430 907 - 1089 -39 Projection Distance (For EB-S21/EB-S17) A Projection distance B Distance from the center of the receiver's lens
Screen Size and Projection Distance 4:3 Screen Size 132 A B Minimum (Wide) to Maximum (Tele) Wide 70" 142x107 207 - 280 -12 80" 160x120 237 - 321 -13 100" 200x150 297 - 401 -17 150" 300x230 446 - 603 -25 200" 410x300 595 - 805 -33 Unit: cm 16:9 Screen Size A B Minimum (Wide) to Maximum (Tele) Wide 28" 62x35 89 - 121 1 30" 66x37 96 - 130 1 50" 110x62 161 - 218 1 60" 130x75 193 - 262 2 70" 155x87 226 - 306 2 80" 180x100 258 - 349 2 100" 220x120 323 - 4
Supported Monitor Displays 133 For EB-S21/EB-S17 Supported Resolutions Computer signals (analog RGB) For EB-X25/EB-W22/EB-X22/EB-X21/EB-X20/EB-X17 Signal Refresh Rate (Hz) Resolution (dots) VGA 60/72/75/85 640x480 SVGA 56/60/72/75/85 800x600 XGA 60/70/75/85 1024x768 WXGA 60 1280x768 60 1366x768 60/75/85 1280x800 WXGA+ 60/75/85 1440x900 WXGA++ 60 1600x900 SXGA 70/75/85 1152x864 60/75/85 1280x1024 60/75/85 1280x960 SXGA+ 60/75 1400x1050 WSXGA+*1,2 60 1680x1050 UXGA 60
Supported Monitor Displays 134 Signal Refresh Rate (Hz) Resolution (dots) Signal Refresh Rate (Hz) Resolution (dots) SDTV (480p) 60 720x480 SDTV (480i/480p) 60 720x480 SDTV (576p) 50 720x576 SDTV (576i/576p) 50 720x576 HDTV (720p) 50/60 1280x720 HDTV (720p) 50/60 1280x720 HDTV (1080i) 50/60 1920x1080 HDTV (1080i) 50/60 1920x1080 HDTV (1080p) 24/30/50/60 1920x1080 *1 EB-X25/EB-W22/EB-X22/EB-X21/EB-X20/EB-X17 only *2 EB-W22 only Composite video Signal Refresh Rate (Hz) Re
Specifications 135 Projector General Specifications EB-S21/EB-S17 Product name EB-X22/EB-X21/EB-X20/EBX17 0.55" LCD panel size 0.55" 0.63" 480,000 786,432 1,024,000 786,432 SVGA (800 (W) x 600 (H) dots) x XGA (1024 (W) x 768 (H) dots)x WXGA (1280 (W) x 800 (H) dots) XGA (1024 (W) x 768 (H) dots)x 3 3 x3 3 Resolution Manual Focus adjustment Digital (1-1.35) Zoom adjustment Manually (1-1.2) UHE lamp, 200 W Model No.: ELPLP78 Lamp 5W Max. audio output 1 Speaker 100-240 V AC±10%, 50/60 Hz 2.
Specifications 136 Computer2 port 1 Video port 1 RCA pin jack S-Video port 1 Mini DIN 4-pin Audio1 port 1 Audio2 port 1 Audio-L/R port 1 RCA pin jack x 2 (L-R) Audio Out port 1 Stereo mini jack Monitor Out port 1 Mini D-Sub15-pin (female) HDMI port 1 HDMI (Audio is only supported by PCM) 1 USB connector (Type A) USB-B port *2 1 USB connector (Type B) LAN Port *3 1 RJ-45 RS-232C port 1 Mini D-Sub 9-pin (male) USB-A port *1, 2 *1 EB-X21/EB-S21/EB-X17/EB-S17 only *2 Suppo
Specifications This product is also designed for IT power distribution system with phase-to-phase voltage 230V. Angle of tilt If you use the projector tilted at an angle of more than 30˚ it could be damaged and cause an accident.
Specifications 138 DECLARATION of CONFORMITY According to 47CFR, Part 2 and 15 Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Located at: Tel: Epson America, Inc. 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806 562-981-3840 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device.
Appearance 139 242 297 93 31.8 244 123.4 35.7 12 89.5 15.9 99.
Glossary 140 This section briefly explains the difficult terms that are not explained in the text of this guide. For details, refer to other commercially available publications. Ad hoc mode A method of wireless LAN connection that communicates with wireless LAN clients without using an access point. AMX Device Discovery AMX Device Discovery is a technology developed by AMX to facilitate AMX control systems for easy operation of the target equipment.
Glossary 141 SDTV An abbreviation for Standard Definition Television that refers to standard television systems which do not satisfy the conditions for HDTVg HighDefinition Television. SNMP An abbreviation for Simple Network Management Protocol, which is the protocol for monitoring and controlling devices such as routers and computers connected to a TCP/IP network.
General Notes All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein.
General Notes 143 General Notice: IBM, DOS/V, and XGA are trademarks or registered trademarks of International Business Machines Corporation. Mac and Mac OS are trademarks of Apple Inc. App Store is a service mark of Apple Inc. Google play is a trademark of Google Inc. Microsoft, Windows, Windows Vista, PowerPoint, and Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. WPA and WPA2 are registered trademarks of Wi-Fi Alliance.
Index 144 A A/V Mute ...................................................... 57 A/V Mute Timer ........................................ 100 A/V Settings ................................................. 90 Abs. Color Temp. ........................................ 85 Air exhaust vent ........................................... 11 Air filter replacement period ................... 124 AMX Device Discovery .............................. 98 Aspect ......................................................
Index 145 L P Lamp cover ................................................... 12 Lamp hours .......................................... 99, 100 Lamp indicator ........................................... 104 Lamp replacement period ........................ 121 LAN port ....................................................... 14 Language ....................................................... 90 Lens Cover Timer ...................................... 100 Light Optimizer .......................................
Index 146 SSID ............................................................... 94 Standby Mode ............................................ 100 Startup Screen .............................................. 89 Storage temperature .................................. 135 Subnet Mask ........................................... 94, 96 Supported Monitor Displays .................... 133 S-Video Port ................................................. 13 Sync info ...................................................