Technical data
Table Of Contents
- Introduction
- Set Initial Conditions (SIC) Command
- IBM Emulation Mode Printer Commands
- Control Codes
- Escape Sequences
- Printer Command Parameters
- Command Structure
- Printer Command Quick Reference (IBM Emulation Mode)
- Selecting a Character Set
- Select Code Page
- Print From Code Page
- Download a Character Set
- Select Global Font
- Select Print Type Style
- Set Print Quality
- Graphics Print Modes
- Horizontal Movement
- Line Control
- Vertical Tabulation
- Line Spacing
- Set Top of Form and Page Length
- Printer Control
- Epson Emulation Mode Printer Commands
- OKI Microline Emulation Mode Printer Commands
- Using the Printer Interface
- Downloading Characters and Fonts
- Barcodes
- Code Pages
- Glossary
- Index
Section 7: Downloading Characters and Fonts
114
The following example loads data for the copyright symbol into the printer. The
data remains in the download storage area until you:
• Set the power switch to Off.
• Overlay the data with download character data.
• Download area is initialized.
<x
1B3D - download command prefix
0F00 - byte count (low byte first)
14 - font ID for Draft/NLQ
40 - start code - ’@’ character
00 - attribute byte 1 - ascender - no 12 high
expansion
00 - attribute byte 2 - default proportional
space data
38 - column 1
44 - column 2
00 - column 3
92 - column 4
AA - column 5
AA - column 6
AA - column 7
82 - column 8
00 - column 9
44 - column 10
38 - column 11
1B4904 - select download font
40 - print ’@’ character
>