Technical data
Table Of Contents
- Introduction
- Set Initial Conditions (SIC) Command
- IBM Emulation Mode Printer Commands
- Control Codes
- Escape Sequences
- Printer Command Parameters
- Command Structure
- Printer Command Quick Reference (IBM Emulation Mode)
- Selecting a Character Set
- Select Code Page
- Print From Code Page
- Download a Character Set
- Select Global Font
- Select Print Type Style
- Set Print Quality
- Graphics Print Modes
- Horizontal Movement
- Line Control
- Vertical Tabulation
- Line Spacing
- Set Top of Form and Page Length
- Printer Control
- Epson Emulation Mode Printer Commands
- OKI Microline Emulation Mode Printer Commands
- Using the Printer Interface
- Downloading Characters and Fonts
- Barcodes
- Code Pages
- Glossary
- Index
11
Section 1: Introduction
Alternating Current Line Voltage Power
Your printer uses one of the following alternating current (ac) line voltage
power values.
Note: Input voltage value varies with the country where the printer was pur-
chased.
• 90-137 V ac, 50/60 Hz
• 180-265 V ac, 50/60 Hz
Power Cord
Printers for the United States and Canada have a 1.83 m (6.0 ft) power cord.
Printers for all other countries have a 2.74 m (9.0 ft) power cord, with the correct
plug to match the country requirements.
Noise Emission Value
The following are noise emission values for your printer.
All measurements were made in accordance with ISO 7779.
Noise Emission Values 248x-001 249x-001
Operating 4 Mic Average, Draft
57 dB(A) N/A
Operating Front Mic Average, Draft
56 dB(A) N/A
Operating 4 Mic Average, NLQ
54 dB(A) 55 dB(A)
Operating Front Mic Average, NLQ
53 dB(A) 53 dB(A)
IDLE (standby mode)
0 dB(A) 0 dB(A)