Technical data
Table Of Contents
- Introduction
- Set Initial Conditions (SIC) Command
- IBM Emulation Mode Printer Commands
- Control Codes
- Escape Sequences
- Printer Command Parameters
- Command Structure
- Printer Command Quick Reference (IBM Emulation Mode)
- Selecting a Character Set
- Select Code Page
- Print From Code Page
- Download a Character Set
- Select Global Font
- Select Print Type Style
- Set Print Quality
- Graphics Print Modes
- Horizontal Movement
- Line Control
- Vertical Tabulation
- Line Spacing
- Set Top of Form and Page Length
- Printer Control
- Epson Emulation Mode Printer Commands
- OKI Microline Emulation Mode Printer Commands
- Using the Printer Interface
- Downloading Characters and Fonts
- Barcodes
- Code Pages
- Glossary
- Index
Section 8: Barcodes
148
UPC-A and EAN-13 barcodes use a flag character for number system encoding
and country code. Your printer provides the capability of printing the human
readable form of this flag character either in the vertical center along the left
side of the barcode, or under the barcode with the other human readable
characters.
Some barcodes use a check character, a character at a predetermined position
within a barcode, whose value is computed by a mathematical algorithm. When
the barcode is scanned, the scanner can check the data using the same algorithm
to validate that the barcode was read correctly.
Each barcode type has a defined set of characters. Specific parameters for each
barcode type, including their character set definitions, are covered in the
Barcode Symbologies section beginning on page 153.
Accessing the printer's resident barcode function requires sending two escape
sequences to the printer:
• Barcode setup command
• Data transfer command
The barcode function is explained in the following four sections:
Barcode Setup Command
Data Transfer Command
Barcode Symbologies
Notes on Barcoding
Barcode Setup Command
This command specifies all the necessary parameters to define the desired
barcode symbology.
Syntax: ESC[ f 60kmsv1 v2 c
Decimal:27 91 10260kmsv1 v2 c
Hex: 1B5B660
6
0
0
kmsv1 v2 c
Flag
Character
Human Readable Characters
Check
Character