Technical data
Table Of Contents
- Introduction
- Set Initial Conditions (SIC) Command
- IBM Emulation Mode Printer Commands
- Control Codes
- Escape Sequences
- Printer Command Parameters
- Command Structure
- Printer Command Quick Reference (IBM Emulation Mode)
- Selecting a Character Set
- Select Code Page
- Print From Code Page
- Download a Character Set
- Select Global Font
- Select Print Type Style
- Set Print Quality
- Graphics Print Modes
- Horizontal Movement
- Line Control
- Vertical Tabulation
- Line Spacing
- Set Top of Form and Page Length
- Printer Control
- Epson Emulation Mode Printer Commands
- OKI Microline Emulation Mode Printer Commands
- Using the Printer Interface
- Downloading Characters and Fonts
- Barcodes
- Code Pages
- Glossary
- Index
13
Section 1: Introduction
2481/2491 (Wide Carriage Models)
Paper
Dimensions
Cut Forms Continuous Forms
Envelopes
Single
Multiple
part
Single
Multiple
part
Width
Maximum 420 mm
(16.5 in.)
420 mm
(16.5 in.)
406 mm
(16.0 in.)
406 mm
(16.0 in.)
241 mm
(9.5 in.)
Maximum
Hole to Hole
N/A N/A 393 mm
(15.5 in.)
393 mm
(15.5 in.)
N/A
Minimum 76 mm
(3.0 in.)
76 mm
(3.0 in.)
76 mm
(3.0 in.)
76 mm
(3.0 in.)
152 mm
(6.0 in.)
Minimum
Hole to Hole
N/A N/A 63 mm
(2.5 in.)
63 mm
(2.5 in.)
N/A
Page Length
Maximum 559 mm
(22.0 in.)
559 mm
(22.0 in.)
559 mm
(22.0 in)
559 mm
(22.0 in.)
152 mm
(6.0 in.)
Minimum 76 mm
(3.0 in.)
76 mm
(3.0 in.)
3.2 mm
(0.125 in.)
3.2 mm
(0.125 in.)
110 mm
(4.1 in.)
Weight
Maximum 90 g/m
2
(24 lb.)
N/A 90 g/m
2
(24 lb.)
N/A 90 g/m
2
(24 lb.)
Minimum 60 g/m
2
(16 lb.)
N/A 56 g/m
2
(15 lb.)
75 g/m
2
(20 lb.)
Thickness - Multiple Part Forms of 45 g/m
2
(12 lb.) paper
0.058 mm
(0.0023 in.)
See Note 0.058 mm
(0.0023 in.)
See Note 0.053 mm
(0.021 in.)
Note: Thickness up to 0.512 mm (0.0202 in.) for 2480/2481 printers; up to0.36 mm
(0.015 in.) for 2490/2491 printers.