Technical data
Table Of Contents
- Introduction
- Set Initial Conditions (SIC) Command
- IBM Emulation Mode Printer Commands
- Control Codes
- Escape Sequences
- Printer Command Parameters
- Command Structure
- Printer Command Quick Reference (IBM Emulation Mode)
- Selecting a Character Set
- Select Code Page
- Print From Code Page
- Download a Character Set
- Select Global Font
- Select Print Type Style
- Set Print Quality
- Graphics Print Modes
- Horizontal Movement
- Line Control
- Vertical Tabulation
- Line Spacing
- Set Top of Form and Page Length
- Printer Control
- Epson Emulation Mode Printer Commands
- OKI Microline Emulation Mode Printer Commands
- Using the Printer Interface
- Downloading Characters and Fonts
- Barcodes
- Code Pages
- Glossary
- Index
179
Section 8: Barcodes
Notes For Barcode Printing
• Barcode printing is always performed unidirectionally (left-to-right).
• The desired barcode will not print if the barcode print area exceeds the
right margin of the printer.
• The desired barcode will not print if the barcode print area exceeds the bot-
tom of the page or bottom margin.
• The desired barcode may not print if undefined values are specified for the
command parameters.
Example:
<x
1B5B66 - barcode setup command prefix
0600 - setup data length (low byte first) -
x0006, 6
B5 - barcode type (invalid value for a
barcode type)
00 - module width = default
00 - space width adjustment = default
3804 - height (low byte first) - x0438 = 0.50
inches
00 - control byte
>