Technical data
Table Of Contents
- Introduction
- Set Initial Conditions (SIC) Command
- IBM Emulation Mode Printer Commands
- Control Codes
- Escape Sequences
- Printer Command Parameters
- Command Structure
- Printer Command Quick Reference (IBM Emulation Mode)
- Selecting a Character Set
- Select Code Page
- Print From Code Page
- Download a Character Set
- Select Global Font
- Select Print Type Style
- Set Print Quality
- Graphics Print Modes
- Horizontal Movement
- Line Control
- Vertical Tabulation
- Line Spacing
- Set Top of Form and Page Length
- Printer Control
- Epson Emulation Mode Printer Commands
- OKI Microline Emulation Mode Printer Commands
- Using the Printer Interface
- Downloading Characters and Fonts
- Barcodes
- Code Pages
- Glossary
- Index
213
Section 9: Code Pages
Set Print Quality, ESC [d
This command sets the print quality for draft or letter quality print:
• 1 and 0 (decimal) and 01 and 00 (hexadecimal) are constants.
• The value of n is a single digit that can be any one of the following digits:
863 3 95 x03 x5F
865 3 97 x03 x61
437G 40 197 x28 xC5
813 3 45 x03 x2D
851 3 83 x03 x53
853T 42 101 x2A x65
857 3 89 x03 x59
869 3 101 x03 x65
920 3 152 x03 x98
1053 4 29 x04 x1D
861 3 93 x03 x5D
1004 3 236 03 EC
858 3 90 03 5A
Syntax: ESC [ d 1 0 n
Decimal: 27 91 100 1 0 n
Hex: 1B 5B640100n
Set Print Quality Selections
Print Quality Decimal Hex
No Change 0 x00
Fast Draft 1 to 63 x01 to x3F
Draft 64 to 127 x40 to x7F
NLQ 128 to 191 x80 to xBF
Code Page
Decimal Hex
Hc Lc Hc Lc