Technical data
Table Of Contents
- Introduction
- Set Initial Conditions (SIC) Command
- IBM Emulation Mode Printer Commands
- Control Codes
- Escape Sequences
- Printer Command Parameters
- Command Structure
- Printer Command Quick Reference (IBM Emulation Mode)
- Selecting a Character Set
- Select Code Page
- Print From Code Page
- Download a Character Set
- Select Global Font
- Select Print Type Style
- Set Print Quality
- Graphics Print Modes
- Horizontal Movement
- Line Control
- Vertical Tabulation
- Line Spacing
- Set Top of Form and Page Length
- Printer Control
- Epson Emulation Mode Printer Commands
- OKI Microline Emulation Mode Printer Commands
- Using the Printer Interface
- Downloading Characters and Fonts
- Barcodes
- Code Pages
- Glossary
- Index
Section 3: IBM Emulation Mode Printer Commands
40
Select 12 cpi
This command sets the pitch at 12 cpi.
Select Print Mode
This command selects the normal font or the download font in Draft , NLQ
(248x only) or LQ (249x only).
Usage Note
• This command cancels any print combinations that conflict with ESC I.
• The following table shows valid values for n for the 248x and 249x print-
ers:
Format ESC :
Decimal 27 58
Hex 1B 3A
Format ESC I n
Decimal 27 73 n
Hex 1B 49 n