Technical data
Table Of Contents
- Introduction
- Set Initial Conditions (SIC) Command
- IBM Emulation Mode Printer Commands
- Control Codes
- Escape Sequences
- Printer Command Parameters
- Command Structure
- Printer Command Quick Reference (IBM Emulation Mode)
- Selecting a Character Set
- Select Code Page
- Print From Code Page
- Download a Character Set
- Select Global Font
- Select Print Type Style
- Set Print Quality
- Graphics Print Modes
- Horizontal Movement
- Line Control
- Vertical Tabulation
- Line Spacing
- Set Top of Form and Page Length
- Printer Control
- Epson Emulation Mode Printer Commands
- OKI Microline Emulation Mode Printer Commands
- Using the Printer Interface
- Downloading Characters and Fonts
- Barcodes
- Code Pages
- Glossary
- Index
51
Section 3: IBM Emulation Mode Printer Commands
• data is the bit-mapped graphics information. The printhead moves at half
the speed of mode 2, giving better resolution.
Dual-Density Bit Image Graphics (Half Speed)
Use this command to print normal density bit images at 120 dpi horizontally
and 72 dpi vertically.
Usage Notes
• Ln and Hn identify the number of bytes in data.
To print less than 256 bytes:
— Hn is 0.
— Ln is the number of bytes you want to print.
To print more than 256 bytes:
— Divide the number of bytes you want to print by 256.
— The result is Hn.
— The remainder is Ln.
• data is the bit-mapped graphics information.
8 08 60 24
9 09 120 24
11 0B 180 24
12 0C 360 24
13 0D 120 24
14 0E 180 24
16 10 360 48
Format ESC L Ln Hn data
Decimal 27 76 Ln Hn data
Hex 1B 4C Ln Hn data
Mode
Horizontal Density WiresDec
Hex