Technical data
Table Of Contents
- Introduction
- Set Initial Conditions (SIC) Command
- IBM Emulation Mode Printer Commands
- Control Codes
- Escape Sequences
- Printer Command Parameters
- Command Structure
- Printer Command Quick Reference (IBM Emulation Mode)
- Selecting a Character Set
- Select Code Page
- Print From Code Page
- Download a Character Set
- Select Global Font
- Select Print Type Style
- Set Print Quality
- Graphics Print Modes
- Horizontal Movement
- Line Control
- Vertical Tabulation
- Line Spacing
- Set Top of Form and Page Length
- Printer Control
- Epson Emulation Mode Printer Commands
- OKI Microline Emulation Mode Printer Commands
- Using the Printer Interface
- Downloading Characters and Fonts
- Barcodes
- Code Pages
- Glossary
- Index
55
Section 3: IBM Emulation Mode Printer Commands
Line Control
Automatic Line Feed (LF)
Executes an automatic line feed when a carriage return is received.
To begin automatic line feed (LF) on carriage return (CR):
To end automatic line feed (LF) on carriage return (CR):
Reverse Line Feed
Causes a reverse line feed; the paper is reversed according to the current line
spacing.
We do not recommend using this command.
Move Paper Vertically
Advances the paper in a vertical movement a distance of n/216 inches relative
to the current print position.
Usage Notes
• n is a value from 0 to 255 (decimal) or 0 to FF (hex).
• n must be a multiple of 3 to advance exactly n/216 inch.
Format ESC 5 Begin
Decimal 27 53 1
Hex 1B 35 01
Format ESC 5 End
Decimal 27 53 0
Hex 1B 35 00
Format ESC ]
Decimal 27 93
Hex 1B 5D
Format ESC J n
Decimal 27 74 n
Hex 1B 4A n