Technical data
Table Of Contents
- Introduction
- Set Initial Conditions (SIC) Command
- IBM Emulation Mode Printer Commands
- Control Codes
- Escape Sequences
- Printer Command Parameters
- Command Structure
- Printer Command Quick Reference (IBM Emulation Mode)
- Selecting a Character Set
- Select Code Page
- Print From Code Page
- Download a Character Set
- Select Global Font
- Select Print Type Style
- Set Print Quality
- Graphics Print Modes
- Horizontal Movement
- Line Control
- Vertical Tabulation
- Line Spacing
- Set Top of Form and Page Length
- Printer Control
- Epson Emulation Mode Printer Commands
- OKI Microline Emulation Mode Printer Commands
- Using the Printer Interface
- Downloading Characters and Fonts
- Barcodes
- Code Pages
- Glossary
- Index
61
Section 3: IBM Emulation Mode Printer Commands
Printer Control
Deselect Printer
When this command is sent, the printer ignores all data except DC1 .
The following values of n are valid:
Setup Barcode Parameter
This command sets the barcode parameters to the printer.
Usage Note
The printer must receive this command prior to the barcode data command.
Format ESC Q n
Decimal 27 81 n
Hex 1B 51 n
Model Dec Hex
Mode
Setting
2480
303ON
182 B6 OFF
2481
22 16 ON
184 B8 OFF
2490
23H
B9H
2491
24H
B7H
Format ESC [ f 6 0 k ms v1v2c
Decimal 27 91 102 6 0 k ms v1v2c
Hex 1B 5B 66 06 00 k ms v1v2c