Technical data
Table Of Contents
- Introduction
- Set Initial Conditions (SIC) Command
- IBM Emulation Mode Printer Commands
- Control Codes
- Escape Sequences
- Printer Command Parameters
- Command Structure
- Printer Command Quick Reference (IBM Emulation Mode)
- Selecting a Character Set
- Select Code Page
- Print From Code Page
- Download a Character Set
- Select Global Font
- Select Print Type Style
- Set Print Quality
- Graphics Print Modes
- Horizontal Movement
- Line Control
- Vertical Tabulation
- Line Spacing
- Set Top of Form and Page Length
- Printer Control
- Epson Emulation Mode Printer Commands
- OKI Microline Emulation Mode Printer Commands
- Using the Printer Interface
- Downloading Characters and Fonts
- Barcodes
- Code Pages
- Glossary
- Index
Section 4: Epson Emulation Mode Printer Commands
70
The following table lists the n parameters for the ESC ! command.
ESC a 27 97 n 1B 61 n
Select Justification
n=0 prints the line of characters against
the left margin.
n=1 centers the line of characters
between the left and right margins.
n=2 prints the line of characters against
the right margin.
n=3 causes lines of characters to be
printed evenly along both the left
and right edges when the buffer
becomes full.
ESC w 27 119 n 1B 77 n
Begin or End Double-high Printing
n=0 End
n=1 Begin
DEL 127 7F Delete Text
Deletes the text character at the end of a
print line.
n= On Off
Dec Hex Print Style
0NoYes
0 00 10 cpi
Yes No
1 01 12 cpi
1YesNo
202Proportional
2YesNo
404Condensed
3YesNo
8 08 Emphasized
4YesNo
16 10 Double-Strike
5YesNo
32 20 Double-Wide
6YesNo
64 40 Italic
7YesNo
128 80 Underscore
Name Dec Hex Description