Technical data
Table Of Contents
- Introduction
- Set Initial Conditions (SIC) Command
- IBM Emulation Mode Printer Commands
- Control Codes
- Escape Sequences
- Printer Command Parameters
- Command Structure
- Printer Command Quick Reference (IBM Emulation Mode)
- Selecting a Character Set
- Select Code Page
- Print From Code Page
- Download a Character Set
- Select Global Font
- Select Print Type Style
- Set Print Quality
- Graphics Print Modes
- Horizontal Movement
- Line Control
- Vertical Tabulation
- Line Spacing
- Set Top of Form and Page Length
- Printer Control
- Epson Emulation Mode Printer Commands
- OKI Microline Emulation Mode Printer Commands
- Using the Printer Interface
- Downloading Characters and Fonts
- Barcodes
- Code Pages
- Glossary
- Index
Section 4: Epson Emulation Mode Printer Commands
76
Other Commands
BEL 7 07 Beeper
Sounds the printer beeper for approximately 1
second.
DC1 17 11 Select Printer (XON)
The host sends this command to signal the printer
to begin printing data.
DC3 19 13 Null (XOFF)
CAN 24 18 Cancel Data
Clears data received since the last buffer
terminator.
NUL 0 00 Null
ESC U 27 85 n 1B 55 n
Set Print Direction
n=0 bidirectional
n=1 unidirectional
ESC @ 27 64 1B 40 Initialize Printer
Clears all data stored in the printer buffer.
ESC [K 27 91 75 1B 5B 4B Set Initial Condition
Resets the printer to its original state. (This
command is the same as ESC [K command in IBM
mode. See page 32.)
ESC K 27 91 75 1B 5B 4B String Descriptor Download Command
Resets the printer to user default settings after
downloading the string descriptor to the printer.
(This command is the same as ESC K command in
IBM mode. See page 32.)
Name Dec Hex Description
ESC 6 27 54 1B 36 Printable Code Area Expansion
ESC 7 27 55 1B 37 Cancel Printable Code Area Expansion
ESC 8 27 56 1B 38 Disable Paper-out Sensor (248x only)
Turns off the paper-out sensor to allow printing to
the end of a paper.
ESC 9 27 56 1B 38 Disable Paper-out Sensor (248x only)
Cancels ESC 8.
ESC # 27 35 1B 23 Disable Control of MSB
Disables the control of the MSB value set by ESC =
or ESC >.
Name Dec Hex Description