Technical data
Table Of Contents
- Introduction
- Set Initial Conditions (SIC) Command
- IBM Emulation Mode Printer Commands
- Control Codes
- Escape Sequences
- Printer Command Parameters
- Command Structure
- Printer Command Quick Reference (IBM Emulation Mode)
- Selecting a Character Set
- Select Code Page
- Print From Code Page
- Download a Character Set
- Select Global Font
- Select Print Type Style
- Set Print Quality
- Graphics Print Modes
- Horizontal Movement
- Line Control
- Vertical Tabulation
- Line Spacing
- Set Top of Form and Page Length
- Printer Control
- Epson Emulation Mode Printer Commands
- OKI Microline Emulation Mode Printer Commands
- Using the Printer Interface
- Downloading Characters and Fonts
- Barcodes
- Code Pages
- Glossary
- Index
77
Section 4: Epson Emulation Mode Printer Commands
ESC & 27 38 0 n1
n2 d1 data
1B 26 0 n1
n2 d1 data
Define Download Characers
ESC : 27 58 0 n 0 1B 3A 00 n
00
Copy Normal Characters from ROM to RAM
ESC < 27 60 1B 3C Select Left-to-Right Printing
ESC = 27 61 1B 3D Set MSBs to Zero
Sets the MSBs of all data sent to the printer to 0.
ESC > 27 62 1B 3E Set MSBs to One
Sets the MSBs of all data sent to the printer to 1.
ESC W 27 87 n 1B 57 n
Begin or End Continuous Double-Wide Printing
n=0 End
n=1 Begin
ESC [f 27 91 102 1B 5B 66 Setup Barcode Parameter
This command is the same as the ESC [f command
in the IBM mode. (See page 32.)
ESC [f 27 91 112 1B 5B 70 Setup Barcode Data
This command is the same as the ESC [p command
in the IBM mode. (See page 32.)
SI 15 0F Start 17 cpi printing
SO 14 0E Begin Double-Wide Printing by Line
ESC SO 27 14 1B 0E Select Double-Wide
ESC SI 27 15 1B 0F Select Condensed Mode
DC2 18 12 Cancel Condensed Mode
DC4 20 14 End Double-Wide Printing by Line
ESC : 27 58 1B 3A Set 12 Pitch Font
Name Dec Hex Description