User`s guide

ビジネスプロジェクター用 ESC/VP21 コマンド使用ガイド
ESC/VP21 Command User
’
s Guide for Business Projecto
rs
6. Error Status
A projector returns the error status when a projector receives "ERR?" command.
The following projectors can return the error status while the projectors become
the error status after cooling down.
EMP-1700/1705/1710/1715, 6000/6100/6110/6010, 1815/1810/1825, S5/X5/83/
EB-G5000/G5100/G5150/G5200W/G5300/G5350
And later models.
[The other models except the above models]
The models except the above models can return the error status while the projectors
The following table shows the return codes and the meaning of error status.
Command Return code
00 :There is no error or the error is recovered
01 : Fan error
03 : Lamp failure at power on
04 : High internal temperature error
06 : Lamp error
07 : Open Lamp cover door error
08 : Cinema filter error
09 : Electric dual-layered capacitor is disconnected
0A : Auto iris error
0B : Subsystem Error
0C : Low air flow error
0D : Air filter air flow sensor error
0E : Power supply unit error (Ballast)
0F : Shutter error
10 : Cooling system error (peltiert element)
ERR?
11 : Cooling system error (Pump)