Operation Manual

❏ Printer Name

Enter the printer name by using keypad on the printer's control panel. You can enter the following characters.

❏ Character limits: 2 to 15 (you must enter at least 2 characters)

❏ Usable characters: A to Z, a to z, 0 to 9, -.

❏ Characters you cannot use at the top: 0 to 9.

❏ Characters you cannot use at the bottom: -

Note:

If you press OK button without entering the printer name, the default printer name (EPSON and the last six digits of the

printer's MAC address) are set.

❏ TCP/IP Address

❏ Auto

Select when you are using an access point at home or you are allowing the IP address to be acquired

automatically by DHCP.

❏ Manual

Select when you do not want the printer's IP address to be changed. Enter the IP Address, Subnet Mask, and

Default Gateway, according to your network environment.

❏ DNS Server

❏ Auto

Select when you want to acquire the IP address automatically.

❏ Manual

Select when you want to set a unique DNS server address to the printer. Enter the addresses for the Primary

DNS Server and the Secondary DNS Server.

❏ Proxy Server

❏ Use

Select when you are using a proxy server in your network environment and you want to set it to the printer.

Enter the proxy server address and port number.

❏ Do Not Use

Select when you are using the printer in a home network environment.

❏ IPv6 Address

❏ Enable

Select this when using an IPv6 address.

❏ Disable

Select this when using an IPv4 address.

Related Information

& “Entering Characters” on page 16

User's Guide

Network Settings