User's Guide
Organization of the Guide and Notations in the Guide Using Each Guide The guides for this projector are organized as shown below. Safety Instructions/Support and Service Guide Contains information on using the projector safely, as well as a support and service guide, troubleshooting check lists, and so on. Make sure you read this guide before using the pro‐ jector.
Organization of the Guide and Notations in the Guide Notations Used in This Guide Safety Indications The documentation and the projector use graphical symbols to show how to use the projector safely. The following shows the symbols and their meanings. Please understand and respect these caution symbols in order to avoid injury to persons or property. Warning This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
Contents Remote Control Operating Range . . . . . . . . . . . 21 Organization of the Guide and Notations in the Guide Operating range (left to right) . . . . . . . . . . . . 21 Operating range (top to bottom) . . . . . . . . . . 21 Using Each Guide . . . . . . . . . . . . . . . . . . . . . 1 Notations Used in This Guide . . . . . . . . . . . 2 Basic Operations Safety Indications . . . . . . . . . . . . . . . . . . . . . . . 2 Starting and Ending Projection . . . . . . .
Contents Setting 3D Images . . . . . . . . . . . . . . . . . . . . . . 35 Check the problem . . . . . . . . . . . . . . . . . . . . 58 When the projector detects a 3D format . . . . 35 Problems relating to images . . . . . . . . . . . . . 59 When the projector cannot detect a 3D format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Problems when projection starts . . . . . . . . . . 63 Problems with the remote control . . . . . . . . . 64 If the 3D image cannot be viewed . . . . . . . .
Contents General Notice . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction Projector Features Dynamic 3D Display Enjoy 3D contents on Blu-ray and images filmed with a 3D camera through a stunning projection display. s p.35 High Quality Images from Smartphones Compatibility with the Mobile High-definition Link (MHL) allows you to enjoy high-quality still images and video from smartphones and tablets accompanied by high-quality sound. You need an MHL compatible smartphone or tablet and an MHL cable (commercially available). s p.
Introduction Other Useful Functions In addition, the following useful functions are provided. • Since you can play back audio over the built-in speakers, no external speakers are needed. • You can view slideshows by simply connecting a USB memory to the projector. When a digital camera is connected, you can view the photos on the camera using Slideshow. s p.
Introduction Part Names and Functions Front/Top Name Function Open when replacing the projector's lamp. s p.70 a Lamp cover b A/V mute slide knob Slide the knob to open and close the lens cover. Close during projection to delete audio and video. s p.28 c Air exhaust vent Exhaust vent for air used to cool the projector internally. Caution While projecting, do not put your face or hands near the air exhaust vent, and do not place objects that may become warped or damaged by heat near the vent.
Introduction Name Function m Zoom ring n Horizontal keystone adjuster Adjusts the image size. s p.24 o Control panel Control panel on the projector. s p.9 Performs horizontal keystone correction. s p.26 Control Panel Buttons/Indicators Function a Turns the projector power on or off. s p.22 Lit when the projector is on. s p.58 b Flashes to indicate warm-up in progress or cool-down in progress. Shows the projector's status through a combination of other indicators lit and flashing. s p.
Introduction Remote Control Button Function a Turns the projector on. s p.22 b Changes to the image from each input port. s p.23 c This button displays the settings menu for HDMI Link. Other buttons control playback, stop or sound volume adjustments of connected devices com‐ patible with the HDMI CEC or MHL standards. s p.41 d Displays and closes the Configuration menu. On the Configuration menu, you can make ad‐ justments and settings for Signal, Image, Input Signal, and so on. s p.
Introduction Button Function l Displays and closes the test pattern. s p.24 m Temporarily hides or shows the image and au‐ dio. s p.28 n Selects the aspect mode according to the input signal. s p.30 o Sets Auto Iris. s p.34 p This function enables smooth projection of games and other activities. s p.34 q The adjustment value returns to its default value when pressed while the menu's adjustment screen is displayed. s p.
Introduction Rear Name Function a Power inlet b Speaker Connect the power cord. s p.22 c Remote receiver d RS-232C port Receives signals from the remote control. s p.21 e Audio (L-R) port Inputs audio from equipment connected to the Video port or the PC port. s p.17 f USB port Connects USB devices such as a USB memory device or a digital camera, and projects images as a slideshow. s p.18 Also, connects an optional Wireless LAN Unit. s p.19 g Service port h Audio Out port Service port.
Introduction Base Name Function a Ceiling mount fixing Attaches the optional ceiling mount here when suspending the projector from a points (three points) ceiling. s p.73 b Security cable fitting Thread a commercially available theft-prevention wire lock through this opening to secure and lock the projector. s p.19 c Rear foot When set up on a surface such as a table, extend the foot to adjust horizontal tilt. s p.
Introduction Appearance Units: mm a b Center of lens Distance from center of lens to suspension bracket fixing point 14
Preparing Installing Various Projection Methods Warning • A special method of installation is required when suspending the projector from a ceiling (ceiling mount). If it is not installed correctly, it could fall causing an accident and injury. • If you use adhesives, lubricants, or oil on the ceiling mount fixing points to prevent screws from loosening, or if you use things such as lubricants or oils on the projector, the projector case may crack causing it to fall from its ceiling mount.
Preparing Adjusting the Projection Size The size of the projection increases as the projector is moved away from the screen. Use the table below to setup the projector at the optimum position from the screen. The values given here are for your reference only. c B D The projected screen becomes smaller when correcting keystone distortion. Increase the projection distance to fit the projected screen to the screen size.
Preparing Connecting a Device Attention • Make cable connections before connecting to a power outlet. • Check the shape of the cable's connector and the shape of the port, and then connect. If you force a connector of a different shape into the port, it could cause damage and a malfunction to occur. Connecting Video Equipment To project images from DVD players or VHS video and so on, connect to the projector using one of the following methods.
Preparing Connecting External Devices Connecting smartphones or tablets You can connect MHL compatible smartphones or tablets. Use an MHL compatible cable to connect the micro USB port of smartphones and tablets to the HDMI1 port on the projector. You can also view video and listen to music while charging a smartphone or tablet. Attention • Be sure to use an MHL compatible cable for making connections.
Preparing Installing Wireless LAN Unit Install an optional Wireless LAN Unit (ELPAP07) to use the wireless LAN function. Insert the Wireless LAN Unit in the USB (TypeA) port. You will need to download the following application to make projection using wireless LAN. For details, consult the download site. • Projecting a computer screen over a wireless connection EasyMP Network Projection allows you to project a computer screen via a network. Download EasyMP Network Projection from the following Web site.
Preparing Preparing the Remote Control Installing the Remote Control Batteries Attention • Check the positions of the (+) and (-) marks inside the battery holder to ensure the batteries are inserted the correct way. • You cannot use other batteries except for the AA size manganese or alkaline. a Remove the battery cover. b Replace the old batteries with new batteries. c While pushing the battery compartment cover catch, lift the cover up. Reattach the battery cover.
Preparing Remote Control Operating Range Operating range (left to right) Operating range (top to bottom) 21
Basic Operations Starting and Ending Projection Turning on the Projector and Projecting a Connect the equipment to the projector. b Connect the power cord. c Open the lens cover. e Turn on the projector. Remote control Control panel Connect using the power cord supplied. you can start projecting by c On, simply connecting the power cord When Direct Power On is set to to the projector without having to press any buttons. s Extended Operation - Direct Power On p.
Basic Operations If the Target Image is not Projected If the image is not projected, you can change the source using one of the following methods. Remote control Press the button for the target port. Control panel Press the Press the c button and select the target port. button to confirm the selection. • For video equipment, start playback first and then change the source.
Basic Operations Adjusting the Projected Screen Displaying the Test Pattern When adjusting the zoom/focus or the projection position just after setting up the projector, you can display a test pattern instead of connecting video equipment. Press the button on the remote control to display the test pattern. Press the button again to end the test pattern display. Adjusting the Focus Turn the focus ring to adjust the focus.
Basic Operations Adjust the Height of the Image Press the foot adjust lever to extend the front adjustable feet. You can tilt the projector up to 12° to adjust image height. c It becomes more difficult to focus the higher the tilt angle is. Use a moderate tilt angle.
Basic Operations c • Auto V-Keystone only functions when Front is selected as the Projection mode. s Settings - Projection p.49 • If you do not want to use the Auto V-Keystone function, set Auto V-Keystone to Off. s Settings - Keystone - Auto V-Keystone p.49 Correct manually (H-Keystone adjuster) Move the horizontal keystone adjuster to the right or left to perform horizontal keystone correction. You can make effective corrections within a projection angle of 30° left to right.
Basic Operations When the left or right is too wide c • You can adjust the volume by pressing the buttons when the gauges are not displayed. s p.27 • You can set H/V-Keystone from the Configuration menu. s Settings - Keystone - H/V-Keystone - V- Keystone/H-Keystone p.49 • In the factory default, H/V-Keystone is reset when the power is turned off. To retain the setting, set Auto V-Keystone and H-Keystone Adjuster to Off. s Settings - Keystone - Auto V-Keystone/H- Keystone Adjuster p.
Basic Operations Hiding the Image and Muting the Audio Temporarily You can use this to temporarily hide the image on the screen and mute the audio. Press the or turn the lens cover on and off to turn projection on and off. The audio is also muted or played. Remote control c Main unit • Because a movie continues to play even when it is hidden, you cannot return to the point at which you hid the image and muted the audio. • The button also switches between muting and playing the audio.
Adjusting the Image Adjusting the Image Selecting the Projection Quality (Color Mode) You can obtain the optimum image quality to suit your surroundings when projecting. The brightness of the image varies depending on the mode selected. a Press the c b button. You can make settings from the Configuration menu. s Image - Color Mode p.46 Select Color Mode. Press the buttons from the displayed menu to select Color Mode, and then press the button to confirm the selection.
Adjusting the Image Mode Application 3D Dynamic For use when projecting 3D images. Images are bright and sharper than 3D Cinema. 3D Cinema For use when projecting 3D images. Switching the Screen Between Full and Zoom (Aspect) You can change the input signal's type, aspect ratio, and resolution to match the Aspect of the projection screen. The available Aspect varies depending on the image signal currently being projected. a Press the b button.
Adjusting the Image Input Image Setting Name (Aspect) Normal Full Zoom Retains the aspect ratio of the input signal, and matches the horizontal size of the projection pan‐ el. The top and bottom of the image may be trunca‐ ted. * The letterbox image used in this explanation is a 4:3 aspect ratio image displayed in 16:9 with black margins at the top and bottom for subtitle placement. The margins at the top and bottom of the screen image are used for subtitles.
Adjusting the Image Absolute Color Adjustments Adjusting Hue, Saturation, and Brightness You can adjust the hue, saturation, and brightness for each of the R (red), G (green), B (blue), C (cyan), M (magenta), and Y (yellow) colors. Hue Adjusts the overall color of the image to be blue, green, or red. Saturation Adjusts the overall vividness of the image. Brightness Adjusts the overall color brightness of the image. a Press the c b button.
Adjusting the Image The menu is displayed in the following order. Image - Advanced - RGB Use the use the buttons to select the item, and then buttons to make the adjustments. c Press the button to return the adjustments to their default values. Color Temp. You can adjust the overall tint of the image. Make adjustments if the image is a little too blue or too red and so on. The menu is displayed in the following order. Image - Color Temp. buttons to make adjustments.
Adjusting the Image Detailed Image Adjustments Adjusting the Sharpness You can make the image clearer. The menu is displayed in the following order. Image - Sharpness buttons to make adjustments. Use the The image becomes sharper as the value is increased, and becomes softer as the value is decreased. Setting Auto Iris By automatically setting the luminance according to the brightness of the displayed image, it lets you enjoy deep and rich images.
Useful Functions Enjoying 3D Images Setting 3D Images Set the source to HDMI1 or HDMI2 to view 3D images. The projector supports following 3D formats. • Frame Packing • Side by Side • Top and Bottom When the projector detects a 3D format The projector automatically projects a 3D image when detecting a 3D format. When the projector cannot detect a 3D format Some 3D TV broadcasts may not contain 3D format signals. If this button to happens, set the 3D format manually.
Useful Functions Using 3D Glasses Use the 3D Glasses (ELPGS03) to view 3D images. s p.73 c The 3D Glasses come with protective stickers. Remove the protective stickers before use. Charging the 3D Glasses Use the USB cable to connect the 3D Glasses to the USB Charging Adapter, and then connect the USB Charging Adapter to an electrical outlet. c with the USB cable (only when the projector is turned on).
Useful Functions Wearing the 3D Glasses a b Turn on the 3D Glasses by sliding the [Power] switch to On. The indicator turns on for several seconds, and then turns off. Put on the 3D Glasses and enjoy the show. c • When you have finished using the 3D Glasses, turn them off by sliding the [Power] switch to Off. • If the 3D Glasses are not used for at least 30 seconds, they turn off automatically. To turn the 3D Glasses back on, slide the [Power] switch to Off, and then slide it back to On.
Useful Functions Warnings Regarding Viewing 3D Images Note the following important points when viewing 3D images. Warning Disassembling or remodeling • Do not disassemble or remodel the 3D Glasses. This could cause a fire to occur or the images to appear abnormal when viewing, causing you to feel unwell. Storage locations • Do not leave the 3D Glasses or the supplied parts within reach of children. They could be accidentally swallowed.
Useful Functions Caution Wearing 3D Glasses • Make sure you wear the 3D Glasses correctly. • • • • • Do not wear the 3D Glasses upside down. If the image is not displayed correctly into the right and left eyes, it could cause you to feel unwell. Do not wear the glasses unless you are viewing a 3D image. How a 3D image is perceived varies depending on the individual. Stop using the 3D function if you feel strange or cannot see in 3D. Continuing to view the 3D images could cause you to feel unwell.
Useful Functions Caution Health Risks • You should not use 3D Glasses if you are sensitive to light, have a heart condition, or are unwell. Doing so could aggravate your pre-existing conditions. Caution Recommended Age of Use • The minimum recommended age to view 3D images is six years old. • Children under the age of six are still developing and viewing 3D images may cause complications. Consult your doctor if you have any concerns.
Useful Functions Using the HDMI Link Function HDMI Link Function When an AV device that meets the HDMI CEC standards is connected to the projector's HDMI port, you can perform linked operations such as linked power on and volume adjustment for the AV system from one remote control. c • As long as the AV device meets the HDMI CEC standards, you can use the HDMI link function even if the AV system in-between does not meet the HDMI CEC standards.
Useful Functions Device Connections You can check the connected devices that are available for HDMI Link, and select on the device you want to project the image from. Devices that can be controlled by HDMI link automatically become the selected device. a b Press the button, and then select Device Connections. Select the device you want to operate using the HDMI Link function. The Device Connections list is displayed. Devices that have a green icon to their left are linked.
Useful Functions Playing Back Image Data (Slideshow) Compatible Data The following types of files stored on USB storage devices such as USB memories and digital cameras that are connected to the projector's USB port can be displayed as a slideshow. Slideshow compatible file types File Type (Extension) Notes • • • • .jpg Images using CMYK color mode are not compatible. Progressive format images are not compatible. Images with a resolution greater than 8192 x 8192 are not compatible.
Useful Functions Display Settings for Image Files and Slideshow Operation Settings You can set the file display order and slideshow operations on the option screen. a Use the buttons to position the cursor over the folder where you want button. Select Option from the submenu to set display conditions, and then press the button. displayed, and then press the b When the option screen is displayed, set each of the items.
Configuration Menu Configuration Menu Functions Configuration Menu Operations On the Configuration menu, you can make adjustments and settings for Signal, Image, Input Signal, and so on. a Press the c button. Remote control Control panel Use the buttons to select the sub menu on the right, and then press the button to confirm the selection. The Configuration menu is displayed. b Use the buttons to select the top menu on the left, and button to confirm then press the the selection.
Configuration Menu c For items adjusted using an adjustment bar, such as the brightness level, you can press the button while the adjustment screen is displayed to return the adjustment value to its default value. Configuration Menu Table If there is no image signal being input, you cannot adjust items related to the image or signal in the Configuration menu. Note that the items displayed for the image, the signal, and other information vary depending on the image signal being projected.
Configuration Menu Function Menu/Settings Explanation Auto Iris Off, Normal, High Speed You can change the luminance adjust‐ ment tracking for changes in brightness in the displayed image. Set to Off for no lu‐ minance adjustment. s p.34 Reset Yes, No You can reset all adjustment values for Image to their default settings. * This is not displayed when a computer image signal is being input. Signal menu No sub menu items are displayed for the signal menu for USB signal input.
Configuration Menu Function Menu/Settings Explanation Noise Reduc‐ tion*2 *5 Off, 1, 2, 3 (This can only be set when Image Processing is set to Fine.) Smoothes out rough images. There are three modes available. Select your favorite setting. It is recommended that this is set to Off when viewing image sources in which noise is very low, such as for DVDs. Overscan*1 *2 Auto, Off, 2%, 4%, 6%, 8% Changes the output image ratio (the range of the projected image).
Configuration Menu Settings menu Function Keystone Menu/Settings H/V-Keystone Explanation V-Keystone -60 - 60 Performs vertical keystone correc‐ tion. s p.26 H-Keystone -60 - 60 Performs horizontal keystone cor‐ rection. s p.26 Auto V-Keystone On, Off Enables or disables Auto V-Key‐ stone. s p.25 H-Keystone Adjuster On, Off Enables or disables H-Keystone Adjuster. s p.26 Volume 0 - 10 Adjusts the volume.
Configuration Menu Function Lock Setting Projection Menu/Settings Explanation Child Lock On, Off This locks the button on the projector's control panel to prevent children from turning on the pro‐ jector by accident. You can turn on the power when locked by holding button for approxi‐ down the mately three seconds. You can still turn off the device using the button, or perform operations with the remote control as usual.
Configuration Menu Function Reset Menu/Settings Yes, No Explanation Resets all Settings settings except for Audio Out Device, Power On Link, Power Off Link, Projection, and User Button. Extended menu Function Operation Display Menu/Settings Explanation Direct Power On On, Off You can set up the projector so that projection starts as soon as the power cord is plugged in without any button operations.
Configuration Menu Function Input Signal Menu/Settings Explanation Video Signal Auto, NTSC, NTSC4.43, PAL, MPAL, N-PAL, PAL60, SECAM Sets the signal type depending on the video de‐ vice connected to the Video port. When set to Auto, the video signal is set automatically. If you notice noise in the image even when set to Auto, or if you are not seeing any image at all, select the correct signal type from the available options.
Configuration Menu Notes on operating the Network menu Basic operations are made in the same way as when using the Configuration menu. However, be sure to select the Setup complete menu to save your settings when done. Saves the settings and exits the Network menu. Yes: No: Cancel: Exits the Network menu without saving the settings. Continues displaying the Network menu. Soft Keyboard Operations In the Network menu, the soft keyboard appears when alphanumeric characters are entered.
Configuration Menu Function Menu/Settings Explanation Channel 1ch, 6ch, 11ch (This can only be set when Connection Mode is set to Quick.) Select the frequency bandwidth used by the wireless LAN. SSID - (This can only be set when Connection Mode is set to Ad‐ vanced.) Enter an SSID. When an SSID is provided for the wireless LAN system in which the projector participates, enter the SSID. You can enter up to 32 single-byte alphanumeric characters.
Configuration Menu Info menu Function Explanation Lamp Hours Displays the cumulative lamp operating time*. Source Displays the source name for the connected equipment currently being projec‐ ted. Input Signal Displays the content of Input Signal set in the Extended menu according to the source. Resolution Displays the reception. Scan Mode Displays the scan mode. Refresh Rate Displays the refresh rate.
Troubleshooting Problem Solving Reading the Indicators You can check the status of the projector from the flashing and lit on the control panel. , (operation indicators), o and m Refer to the following table to check the projector's status and how to remedy problems shown by the indicators. Indicator status during an error/warning : Lit Indicators Status : Flashing : Status maintained : Off Remedy Replace Lamp It is time to replace your lamp.
Troubleshooting Indicators Status Internal Error (blue) Remedy The projector has malfunctioned. Remove the power plug from the electrical outlet, and contact your local dealer or the nearest Epson repair center. s Epson Projector Contact List (orange) Fan Error Sensor Error (blue) (orange) Auto Iris Error (blue) (orange) Power Err. (Ballast) (blue) (orange) (blue) (orange) Lamp Error There is a problem with the lamp, or it failed to turn on.
Troubleshooting Indicators Status High Temp Error (Overheating) Remedy The internal temperature is too high. • The lamp turns off automatically and projection stops. Wait for about five minutes. When the fan has stopped, disconnect the power cord. • If the projector is installed next to a wall, make sure there is at least 20 cm between the wall and the projector's exhaust vent. • If the air filter is clogged, clean it. s p.
Troubleshooting Problem Problems relating to im‐ ages Page No images appear. p.59 Projection does not start, the projection area is completely black, or the projection area is completely blue. Moving images being projected from a computer are not projected. p.60 "Not supported" is displayed. p.60 "No Signal" is displayed p.61 Images are fuzzy or out of focus. p.61 Interference or distortion appears in the images. p.
Troubleshooting Check Remedy Is an image signal being input? Check that the connected device is turned on. When Messag‐ es is set to On from the Configuration menu, image signal mes‐ sages are displayed. s Extended - Display - Messages p.51 Is the image signal format setting correct? When Video is input If nothing is projected even when Video Signal is set to Auto from the Configuration menu, set the signal that matches the connected device. s Extended - Input Signal - Video Sig‐ nal p.
Troubleshooting "No Signal" is displayed Check Remedy Are the cables connected correctly? Check that all the cables required for projection are securely connected. s p.17 Is the correct image input port selected? Change the image with the source buttons on the remote con‐ trol, or the button on the control panel. s p.23 Is the connected device turned on? Turn on the device.
Troubleshooting Check Is an extension cable being used? Remedy If an extension cable is used, electrical interference may affect the signals. (Only when projecting computer image sig‐ nals) The projector uses automatic adjustment functions to project at the optimum status. However, depending on the signal, some may not be adjusted correctly even after performing self correc‐ Are the Sync. and Tracking settings adjusted tions. If this happens, adjust the Tracking and Sync.
Troubleshooting Check Remedy (Only when projecting images from a video device) Adjust the Color Saturation and Tint settings from the Config‐ uration menu. s Image - Color Saturation/Tint p.46 Are the color saturation and tint adjusted cor‐ rectly? Images appear dark Check Remedy Is the image brightness set correctly? Adjust the Brightness setting from the Configuration menu. s Image - Brightness p.46 Is the contrast adjusted correctly? Adjust the Contrast setting from the Configuration menu.
Troubleshooting Problems with the remote control The remote control does not respond Check Remedy Is the remote control light-emitting area Point the remote control towards the remote receiver. Also, pointing towards the remote receiver on the check the operating range. s p.21 projector during operation? Is the remote control too far from the projec‐ Check the operating range. s p.
Troubleshooting The 3D image is enlarged and truncated Check Is the correct 3D video format set? Remedy Video may be truncated if an incorrect 3D format is set. Set the correct 3D format. s p.35 Problems with HDMI HDMI link does not function Check Remedy Are you using a cable that meets the HDMI standards? Operations are not possible with cables that do not meet the HDMI standards.
Troubleshooting Other problems No audio, or the audio is too low Check Remedy Is the audio cable connected correctly? Try disconnecting the cable from the Audio (L-R) port, and then reconnecting. Is the volume too low? Adjust the volume so that you can hear the audio. s p.27 Is it connected with an HDMI cable? If no audio is output when connecting via an HDMI cable, set the connected equipment to PCM output.
Troubleshooting Event ID Cause Remedy 0479 04FF A system error occurred in the projector. Restart the projector. 0891 The same SSID access point cannot be found. Set the computer, the access point, and the projector to the same SSID. 0892 WPA and WPA2 authentication type mismatch. Check the setting of wireless LAN security to see if it is correct. 0894 Communications was cut off because a con‐ nection was made to the wrong access point.
Maintenance Maintenance Cleaning the Parts You should clean the projector if it becomes dirty or if the quality of projected images starts to deteriorate. Warning Do not use sprays that contain flammable gas to remove dirt and dust from the projector's lens, air filter, and so on. The projector may catch fire due to the high internal temperature of the lamp. Cleaning the air filter Clean the air filter if dust has accumulated on the air filter or when the following message is displayed.
Maintenance Cleaning the lens Use a commercially available cloth for cleaning glasses to gently wipe off dirt from the lens. Attention Do not rub the lens with harsh materials or handle the lens too roughly as it can easily become damaged. Cleaning the 3D Glasses Use the cloth supplied to gently wipe off dirt from the lenses of the 3D Glasses. Attention • Do not rub the lenses of the glasses with harsh materials or handle the lenses too roughly as they can easily become damaged.
Maintenance Replacing Consumables Replacing the air filter c Dispose of used air filters properly in accordance with your local regulations. Filter frame: ABS Filter: Polyurethane foam a Press the button on the remote control or the control panel to turn off the power, and then disconnect the power cord. b Open the air filter cover. c d Install the new air filter. e Close the air filter cover. Slide in the air filter until it clicks into place. Remove the old air filter.
Maintenance Caution • Do not touch the lamp cover immediately after turning off the projector as it is still hot. Wait until the lamp has cooled down sufficiently before removing the lamp cover. Otherwise, you could get burnt. • We recommend the use of genuine EPSON option lamps. The use of non-genuine lamps may affect projection quality and safety. Any damage or malfunction caused by the use of non-genuine lamps may not be covered by Epson's warranty.
Maintenance h i Replace the lamp cover. Slide the cover back into place. Tighten the lamp cover fixing screw. Warning Do not disassemble or remodel the lamp. If a modified or disassembled lamp is installed in the projector and used, it could cause a fire, electric shock, or an accident. Caution • Make sure you install the lamp and lamp cover securely. If they are not installed correctly, the power does not turn on. • The lamp contains mercury (Hg).
Appendix Optional Accessories and Consumables The following optional accessories/consumables are available for purchase if required. This list of optional accessories/consumables is current as of: 2013.6. Details of accessories are subject to change without notice. Varies depending on country of purchase. Optional Items Name Model No. Explanation Ceiling mount* ELPMB23 Use when installing the projector on a ceiling.
Appendix Supported Resolutions Computer Signals (Analog RGB) Signal Refresh Rate (Hz) Resolution (dots) VGA 60 640 x 480 SVGA 60 800 x 600 XGA 60 1024 x 768 SXGA 60 1280 x 960 60 1280 x 1024 60 1280 x 768 60 1366 x 768 60 1280 x 800 60 1600 x 900 WXGA WXGA++ Composite Video Signal Refresh Rate (Hz) Resolution (dots) TV (NTSC) 60 720 x 480 TV (SECAM) 50 720 x 576 TV (PAL) 50/60 720 x 576 HDMI1/HDMI2 Input Signal Signal Refresh Rate (Hz) Resolution (dots) VGA 60 64
Appendix Signal Refresh Rate (Hz) Resolution (dots) SDTV (480p) 60 720 x 480 SDTV (576p) 50 720 x 576 HDTV (720p) 50/60 1280 x 720 HDTV (1080i) 50/60 1920 x 1080 HDTV (1080p) 24/30 1920 x 1080 3D Input Signal HDMI Signal Refresh Rate Resolution (dots) (Hz) 3D Format Frame Pack‐ ing Side by Side Top and Bot‐ tom HDTV750p (720p) 50/60 1280 x 720 HDTV1125i (1080i) 50/60 1920 x 1080 - - HDTV1125p (1080p) 50/60 1920 x 1080 - - HDTV1125p (1080p) 24 1920 x 1080 3D Input Sign
Appendix Specifications Product name EH-TW5200 Appearance 297 (W) x 108 (H) x 247 (D) mm Panel Size 0.61" wide Display method Polysilicon TFT active matrix Resolution 1920 (W) x 1080 (H) x 3 Scanning Fre‐ quency Digital Pixel Clock: 13.5 - 150 MHz Horizontal: 15 - 80 kHZ Vertical: 24, 30, 50 - 85 Hz Analog Pixel Clock: 13.5 - 150 MHz Horizontal: 15 - 80 kHZ Vertical: 24, 50 - 85 Hz Focus adjustment Manual Zoom adjustment Manual (approx. 1 to 1.
Appendix речовин в електричному та електронному обладнанні. Angle of tilt If you use the projector tilted at an angle of more than 12°, it could be damaged or cause an accident. ESC/VP21 Commands Use of ESC/VP21 enables control of the projector from an external device. For more details, see the following Web site. http://www.epson.
Appendix DECLARATION of CONFORMITY According to 47CFR, Part 2 and 15 Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Located at: Tel: Epson America, Inc. 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806 562-981-3840 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device.
Appendix Glossary This section briefly explains the difficult terms that are not explained in context in the text of this guide. For details, refer to other commercially available publications. HDCP HDMI ™ HDCP is an abbreviation for High-bandwidth Digital Content Protection. It is used to pre‐ vent illegal copying and protect copyrights by encrypting digital signals sent over DVI and HDMI ports.
Appendix Interlace Transmits information needed to create one screen by sending every other line, starting from the top of the image and working down to the bottom. Images are more likely to flicker because one frame is displayed every other line. Pairing Register devices in advance when connecting with Bluetooth devices to ensure mutual communication.
Appendix General Notes All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the infor‐ mation contained herein.
Appendix General Notice EPSON and ELPLP are the trademarks or registered trademarks of Seiko Epson Corporation. HDMI and High-Definition Multimedia Interface are the trademarks or registered trademarks of HDMI Licensing LLC. ™ logo and Full HD 3D Glasses™ are trademarks of the Full HD 3D Glasses Initiative™. The Full HD 3D Glasses ® Bluetopia® is provided for your use by Stonestreet One, LLC® under a software license agreement.
Index Cool-down ....................................................... 23 3 3D brightness ................................................. 3D display ......................................................... 3D format ......................................................... 3D Glasses ........................................................ 3D images ........................................................ 3D settings ....................................................... 3D viewing notice ...........
Index IP Address Display ......................................... 54 IP Settings ........................................................ 54 Replacing consumables .............................. 70 Replacing the air filter .................................. 70 Replacing the lamp ....................................... 70 Reset .............................................. 47, 48, 51, 52 Reset all ............................................................. 55 Reset lamp hours ...........................
Index V-Keystone ....................................................... 49 Volume ....................................................... 27, 49 W Wireless LAN menu ....................................... 53 Wireless LAN Power ...................................... 53 Z Zoom .................................................................. 30 Zoom adjustment ......................................... 24 Zoom ring ...........................................................
