User's Guide
Organization of the Guide and Notations in the Guide Using Each Guide The guides for this projector are organized as shown below. Safety Instructions/Support and Service Guide Contains information on using the projector safely, as well as a support and service guide, troubleshooting check lists, and so on. Make sure you read this guide before using the projector.
Organization of the Guide and Notations in the Guide Notations Used in This Guide Safety Indications The documentation and the projector use graphical symbols to show how to use the projector safely. The following shows the symbols and their meanings. Please understand and respect these caution symbols in order to avoid injury to persons or property. Warning This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
Organization of the Guide and Notations in the Guide Checking Supplied Items See the following list to check the supplied items. If anything is missing or damaged, contact the store where you purchased the projector. Projector Remote control s p.13 Power cable AA size alkaline batteries (x2) s p.21 3D Glasses Pack s p.41 WirelessHD Transmitter Pack (EH-TW6000W only) s p.53 See the documentation supplied with the 3D Glasses for more information on the 3D Glasses pack. Guides s p.
Contents Installing the Remote Control Batteries . . . . . . . 21 Organization of the Guide and Notations in the Guide Remote Control Operating Range . . . . . . . . . . . 21 Operating range (left to right) . . . . . . . . . . . . 21 Using Each Guide . . . . . . . . . . . . . . . . . . . . . 1 Operating range (top to bottom) . . . . . . . . . . 21 Notations Used in This Guide . . . . . . . . . . . 2 Safety Indications . . . . . . . . . . . . . . . . . . . . . . .
Contents Setting Auto Iris . . . . . . . . . . . . . . . . . . . . . . . . 36 WirelessHD Transmission Range . . . . . . . . . . . . 55 Viewing the Image at the Saved Image Quality (Memory Function) . . . . . . . . . . . 38 Configuration Menu Saving Function . . . . . . . . . . . . . . . . . . . . . . . . 38 Configuration Menu Functions . . . . . . . . 56 Saving a Memory . . . . . . . . . . . . . . . . . . . . . . . 38 Configuration Menu Operations . . . . . . . . . . . . 56 Loading a Memory . . . .
Contents Lamp replacement period . . . . . . . . . . . . . . 79 Replacing Consumables . . . . . . . . . . . . . . . . . . 80 Replacing the air filter . . . . . . . . . . . . . . . . . 80 Replacing the lamp . . . . . . . . . . . . . . . . . . . 81 Resetting lamp hours . . . . . . . . . . . . . . . . . . 82 Appendix Optional Accessories and Consumables . . . . . . . . . . . . . . . . . . . . . . . . 84 Optional Items . . . . . . . . . . . . . . . . . . . . . . . . . 84 Consumables . . . . . . . . . . . . .
Introduction Projector Features Dynamic 3D Display Enjoy 3D contents on Blu-ray and images filmed with a 3D camera through a stunning projection display. s p.41 You need 3D Glasses to view 3D images. s p.41 Selecting Modes to Match what you are Watching (Color Mode) By simply selecting the Color Mode, you can project the optimum image to suit your surroundings. s p.
Introduction Conforms to Wireless Transmissions for the WirelessHD Standards (EH-TW6000W only) The projector can wirelessly receive data and control signals for images and audio from WirelessHD compatible devices. Because devices do not need to be connected directly to the projector via a cable, they can be setup wherever you like. s p.53 Projector Transmitter Player Other Useful Functions In addition, the following useful functions are provided.
Introduction Part Names and Functions Front/Top Name a Lamp cover b Air exhaust vent Function Open when replacing the projector's lamp. s p.81 Exhaust vent for air used to cool the projector internally. Caution While projecting, do not put your face or hands near the air exhaust vent, and do not place objects that may become warped or damaged by heat near the vent. c Remote receiver d Projector's lens Receives signals from the remote control. s p.
Introduction Control Panel Buttons/Indicators a Function Brightness sensor Detects the brightness of the room. When Color Mode is set to "Auto", the optimum image quality is set according to the brightness detected by the sensor. s p.29 Operation indicator Flashes to indicate warm-up in progress or cool-down in progress. Shows the projector's status through a combination of other indicators lit and flashing. s p.67 b c Turns the projector power on or off. s p.22 Lit when the projector is on. s p.
Introduction Rear Name Function a Speaker The projector's built-in speaker. Outputs audio. Set Inverse Audio to On to use the built-in speaker when the projector is suspended from a ceiling. s Settings - Audio - Inverse Audio p.61 b Power inlet c Remote receiver Connects the power cable. s p.22 d External 3D IR port e RS-232C port Connects the optional External 3D IR emitter. s p.43 f PC port g Component port Connects to the RGB output port on a computer. s p.
Introduction Base Name Function a Ceiling mount fixing Attach the optional ceiling mount here when suspending the projector from a points (four points) ceiling. s p.84 b Front adjustable foot When setup on a surface such as a table, extend the foot to adjust the height. s p.
Introduction Remote Control Button Function a Turns the projector on. s p.22 b Turns the projector off. s p.23 c The remote control buttons light up for approximately 10 seconds. This is useful when operating the remote control in the dark. d Changes to the image from each input port. s p.23 button is only available for EHThe TW6000W. e This button displays the settings menu for HDMI Link.
Introduction Button Function m Displays and closes the configuration menu. On the configuration menu, you can make adjustments and settings for Signal, Image, Input Signal, and so on. s p.56 n Return to the previous menu level when a menu is displayed. s p.56 o Sets Auto Iris. s p.36 p Adjusts the hue, saturation, and brightness for each RGBCMY color. s p.32 q Selects the aspect mode according to the input signal. s p.30 r Splits the screen in two and projects two image sources simultaneously.
Introduction Appearance Units: mm a b Center of lens Distance from center of lens to suspension bracket fixing point 15
Preparing Setting Up Various Projection Methods Warning • A special method of installation is required when suspending the projector from a ceiling (ceiling mount). If it is not installed correctly, it could fall causing an accident and injury. • If you use adhesives, lubricants, or oil on ceiling mount fixing points to prevent screws from loosening, or if you use things such as lubricants or oils on the projector, the projector case may crack causing it to fall from its ceiling mount.
Preparing Adjusting the Projection Size The size of the projection increases as the projector is moved away from the screen. Use the table below to setup the projector at the optimum position from the screen. The values given here are for your reference only.
Preparing Connecting to Devices Attention • Turn off the equipment you want to connect before connecting. If the equipment is on when you connect, it could cause a malfunction. • Check the shape of the cable's connector and the shape of the port, and then connect. If you force a connector of a different shape into the port, it could cause damage and a malfunction to occur.
Preparing Connecting to a Computer To project images from a computer, connect the computer using one of the following methods. When using a computer cable For audio connections, make sure you use an audio cable labeled "No resistance" to connect the 2RCA W stereo mini-plug. When using an HDMI cable Fix the HDMI cable in place using the HDMI cable clamp. s p.19 Connecting an HDMI Cable Clamp Clamp the HDMI cable to the cable holder to fix it in place.
Preparing Attention • If you use a USB hub, the connection may not operate correctly. Devices such as digital cameras and USB devices should be connected to the projector directly. • Connect a digital camera using a USB cable specified for use with the device. • Use a USB cable less than 3 m in length. If the cable exceeds 3 m, slideshow may not function correctly.
Preparing Preparing the Remote Control Installing the Remote Control Batteries Attention • Check the positions of the (+) and (-) marks inside the battery holder to ensure the batteries are inserted the correct way. • You cannot use other batteries except for the AA size manganese or alkaline. a Remove the battery cover. b Replace the old batteries with new batteries. c While pushing the battery compartment cover catch, lift the cover up. Reattach the battery cover.
Basic Operations Starting and Ending Projection Turning on the Projector and Projecting a Connect the power cable. b Remove the lens cover. d Connect using the power cable supplied. Turn the power on. Remote control c c Turn on the connected equipment. Control panel When Direct Power On is set to On, you can start projecting by simply connecting the power cable to the projector without having to press any buttons. s Extended - Operation - Direct Power On p.
Basic Operations If the Target Image is not Projected If the image is not projected, you can change the source using one of the following methods. Remote control Press the button for the target port. c Control panel Press the Press the button and select the target port. button to confirm the selection. • For video equipment, start playback first and then change the source.
Basic Operations f Reattach the lens cover.
Basic Operations Adjusting the Projection Screen Displaying the Test Pattern When adjusting the zoom/focus or the projection position just after setting up the projector, you can display a test pattern instead of connecting video equipment. Press the Press the button on the remote control to display the test pattern. button to close the test pattern, or select Exit. Focus Adjustment Turn the focus ring to adjust the focus.
Basic Operations Adjusting the Projector's Tilt If the projection screen is tilted (the left and right sides of the projector are at different heights) when the projector is setup on a table, adjust the front foot so that both sides are level with each other. Correcting Keystone Distortion You can correct keystone distortion using one of the following methods. Correct automatically Auto V-Keystone Automatically correct vertical keystone distortion.
Basic Operations You can make effective corrections within a projection angle of 30° left to right. c H-Keystone Adjuster p.61 If you want to use the H-Keystone Adjuster, set H-Keystone Adjuster to On. s Settings - Keystone - Correct manually (H/V-Keystone) You can use the buttons on the control panel to correct keystone distortion. Press the buttons to display the V-Keystone/H-Keystone gauges.
Basic Operations Adjusting the Volume You can adjust the volume by using the the projector's control panel. buttons on the remote control or the Remote control c buttons on Control panel • You can also adjust the volume from the configuration menu. s Settings - Audio p.61 • Under normal conditions, you can adjust the volume of the projector's built-in speaker.
Adjusting the Image Basic Settings for Image Selecting the Projection Quality (Color Mode) You can obtain the optimum image quality to suit your surroundings when projecting. The brightness of the image varies depending on the mode selected. a Press the c b button. You can make settings from the configuration menu. s Image - Color Mode p.57 Select Color Mode. Press the buttons from the displayed menu to select Color Mode, and then press the button to confirm the selection.
Adjusting the Image Choices when projecting 2D images Mode Application Auto Sets the color mode automatically according to the surroundings. Dynamic Ideal for use in a bright room. This is the brightest mode, and reproduces shadow tones well. Living Room Ideal for use in a bright room. Images are clear and sharp. Natural Ideal for use in a dark room. We recommend performing color adjustment in this mode. s p.7 Cinema Ideal for watching movies and concerts in a dark room.
Adjusting the Image Aspect Ratio of Input Image Setting Name (Aspect Ratio) Normal Full Zoom Wide 4:3 Images 16:9 Images and Images Recorded Using Squeeze Letterbox Images*1*2 Retains the aspect Displays the vertical ratio of the input sig- and horizontal at the nal, and matches the maximum. Both of horizontal size of the the horizontal ends projection panel. are enlarged. The top and bottom of the image may be truncated. *1 When Zoom is set, subtitles and so on may not be displayed.
Adjusting the Image Absolute Color Adjustments Adjusting Hue, Saturation, and Brightness You can adjust the hue, saturation, and brightness for each of the R (red), G (green), B (blue), C (cyan), M (magenta), and Y (yellow) colors. Hue Adjusts the overall color of the image to be blue, green, or red. Saturation Adjusts the overall vividness of the image. Brightness Adjusts the overall color brightness of the image. a Press the button. c Use the buttons to select Hue, Saturation, or Brightness.
Adjusting the Image Adjusting the Gamma You can adjust slight coloration differences that may occur due to the device being used when the image is displayed. You can use one of the following three methods selected from the configuration menu.
Adjusting the Image Adjust using the gamma adjustment graph Make adjustments while viewing the gamma adjustment graph for the image being projected. a b Use the buttons to select the part you want to adjust from the graph. Use the buttons to adjust the brightness, and then press button to confirm the the selection. Adjusting the RGB (Offset/Gain) For the image's brightness, you can adjust the dark areas (Offset) and the bright areas (Gain) for R (red), G (green), and B (blue).
Adjusting the Image c Press the button to return the adjustments to their default values. Skin Tone You can adjust the skin tone. Make adjustments if the skin tone is too red or too green and so on. The menu is displayed in the following order. Image - Skin Tone buttons to make adjustments. Use the The image becomes greener when set to the right (positive) and redder when set to the left (negative). c Press the button to return the adjustments to their default values.
Adjusting the Image Detailed Image Adjustments Adjusting the Sharpness You can make the image clearer. It cannot be adjusted when a computer image signal is being input. Thin Line Enhancement Details such as hair and patterns on clothing are enhanced. Thick Line Enhancement Rough parts such as outlines for entire subjects or the background are enhanced, making the overall image clearer. Vert. Line Enhancement The horizontal and vertical directions for images are enhanced. Horiz.
Adjusting the Image a Press the Remote control button. Control panel c Use the buttons to select the item, and then press the button to confirm the selection. d Press the menu. The configuration menu is displayed. b Select Image - Auto Iris. The Auto Iris adjustment screen is displayed.
Adjusting the Image Viewing the Image at the Saved Image Quality (Memory Function) Saving Function You can save the adjustment values for some images and image quality settings in the configuration menu for later use (Save Memory). Because these saved adjustment values can be loaded from the remote control, you can easily switch to your preferred image quality (Load Memory). The following configuration menu functions can be saved. Image s p.
Adjusting the Image Loading a Memory a Press the b Select the target memory name. button, and then select Load Memory. The Load Memory screen is displayed. c • The color mode saved to the memory is displayed on the right. • Depending on the input signal, part of the loaded memory item may not be applied to the projected image. • Memories saved for 2D images can only be loaded when projecting 2D images. Memories saved for 3D images can only be loaded when projecting 3D images.
Adjusting the Image d Enter a name. Use the buttons to select a button to concharacter, and then press the firm the selection. Enter up to 12 characters. When you have finished entering the name, select Finish. The memory name is changed.
Useful Functions Enjoying 3D Images Watching 3D Images When 3D data is received from the HDMI1, HDMI2, or WirelessHD (EH-TW6000W only) source, the image is automatically projected in 3D. The following 3D formats are supported. • Frame Packing • Side by Side • Top and Bottom Using 3D Glasses Use the supplied or optional 3D Glasses (ELPGS01) to view 3D images. 3D Glasses are not supplied with EH-TW5900.
Useful Functions Projecting 3D images a b Connect an AV device capable of playing 3D images to the projector. Turn on the AV device and the projector, and then press the button. If the 3D image is projected automatically, you do not need to press any buttons. c • How a 3D image is perceived varies depending on the individual. • The image is not displayed in 3D if 3D Display is set to Off. Press the button on the remote control. s Signal - 3D Setup - 3D Display p.
Useful Functions Viewing Area for 3D Images The projector is equipped with an internal 3D emitter that synchronizes with your 3D Glasses to view 3D images. This allows you to view 3D images within the range shown in the figure below. Use the optional External 3D IR emitter if you cannot view the 3D image normally or if you are in a particularly spacious room. s p.
Useful Functions Caution About the 3D Glasses • Do not drop or press too forcefully on the 3D Glasses. If the glass sections and so on are broken, an injury could occur. Store the glasses in the soft glasses case supplied. • Be careful of the edges of the frame when wearing the 3D Glasses. If it pokes your eye and so on, an injury could occur. • Do not place your finger in any of the moving sections (such as the hinges) of the 3D Glasses. Otherwise an injury could occur.
Useful Functions Caution Watching 3D Images • If your eyes feel fatigued or uncomfortable when viewing 3D images, stop viewing immediately. Continuing to view the 3D images could cause you to feel unwell. • When viewing 3D images be sure to always wear 3D Glasses. Do not attempt to view 3D images without 3D • • • • • Glasses. Doing so could cause you to feel unwell. Do not place any breakable or fragile objects around you when using 3D Glasses.
Useful Functions Caution Lithium Coin Batteries • Only CR2032 lithium coin batteries can be used by this device. Do not attempt to use any other type of batteries. If the batteries are inversed by mistake, they could explode or leak, causing a fire, injury, or damaging the surroundings. • Do not put batteries in a flame or heat them up in any way. Doing so could result in an explosion.
Useful Functions Changing Between Two Types of Images Split Screen You can project two different images at once, one on the left and one on the right. You can project these images at the same size, or make one larger or smaller than the other to view a sub image while you are watching the larger main image.
Useful Functions Changing the split screen settings You can change the source and the display size used for split screen display from the Split Screen Setup menu. a b Press the button during split screen projection. Make settings for each of the displayed functions. The Split Screen Setup menu is displayed. c Press the button during split screen projection to immediately display the Split Screen Setup menu.
Useful Functions HDMI Link HDMI Link Function When an AV device that meets the HDMI CEC standards is connected to the projector's HDMI port, you can perform linked operations such as linked power on and volume adjustment for the AV system from one remote control. Also, when projecting images in WirelessHD, you can use the HDMI link function (EHTW6000W only).
Useful Functions c • To use the HDMI Link function, you must configure the connected device. See the documentation supplied with the connected device for more information. • Even when using the WirelessHD Transmitter with Power On Link set to Device -> PJ or Bidirectional, if WirelessHD is set to On, this projector also turns on when the AV device connected to the WirelessHD Transmitter is turned on (EH-TW6000W only). s Settings-HDMI Link-Power On Link p.
Useful Functions Playing Back Image Data (Slideshow) Compatible Data The following types of files stored on USB storage devices such as USB memories, digital cameras, and so on that are connected to the projector's USB port can be displayed as a slideshow. Slideshow compatible file types File Type (Extension) Notes • • • • .jpg Images using CMYK color mode are not compatible. Progressive format images are not compatible. Images with a resolution greater than 8192 x 8192 are not compatible.
Useful Functions Display Settings for Image Files and Slideshow Operation Settings You can set the file display order and slideshow operations on the option screen. a Use the buttons to position the cursor over the folder where you want button. Select Option from the submenu to set display conditions, and then press the button. displayed, and then press the b When the option screen is displayed, set each of the items.
Useful Functions Connecting with WirelessHD (EH-TW6000W Only) Installing and Connecting the WirelessHD Transmitter You can use the included WirelessHD Transmitter to wirelessly receive image and sound data as well as control signals. This eliminates the need to connect any cables to the projector, which is convenient when you are unable to place the projector near your AV devices. Connect the Transmitter to the HDMI output of any AV device or AV System capable of HDMI playback.
Useful Functions Reconnecting If the projector cannot project images from the WirelessHD Transmitter, follow the steps below to reconnect. a Setup the WirelessHD Transmitter close to the projector. s p.55 c Approximately 10 seconds after turning on the projector, press the [Setup] button on the transmitter. c Make settings for each of the displayed functions. c projectors operating in the area.
Useful Functions WirelessHD Transmission Range The following shows the communication transmission range for the WirelessHD. Horizontal direction Vertical direction (placed on a table and so on) c Vertical direction (suspended from a ceiling) • The wireless transmission range varies depending on the placement and material of the surrounding furniture and walls. The values given here are for your reference only. • The projector cannot communicate through walls.
Configuration Menu Configuration Menu Functions Configuration Menu Operations On the configuration menu, you can make adjustments and settings for Signal, Image, Input Signal, and so on. a Press the Remote control c button. Control panel Use the buttons to select the sub menu on the right, and button to confirm then press the the selection. The configuration menu is displayed. b Use the buttons to select the top menu on the left, and button to confirm then press the the selection.
Configuration Menu c For items adjusted using an adjustment bar, such as the brightness level, you can press the button while the adjustment screen is displayed to return the adjustment value to its default value. Configuration Menu Table If there is no image signal being input, you cannot adjust items related to the image or signal in the configuration menu. Note that the items displayed for the image, the signal, and other information vary depending on the image signal being projected.
Configuration Menu Function Menu/Settings Explanation Power Consumption Normal, ECO You can set the lamp brightness to one of two settings. Select ECO if the images being projected are too bright. When ECO is selected, power consumption during projection decreases, and fan rotation noise is reduced. Auto Iris Off, Normal, High Speed You can change the luminance adjustment tracking for changes in brightness in the displayed image. Set to Off for no luminance adjustment. s p.
Configuration Menu Function Sync.*2 *3 Menu/Settings Explanation 0 to 31 Adjusts computer images when flickering, fuzziness, or interference appear in the images. • Adjusting the Brightness, Contrast, or Sharpness may cause flickering or blurriness. • Adjusting the synchronization after adjusting tracking allows for more accurate adjustments. Position*2 *4 Progressive*2 Adjusts the display position up, down, left, and right when a part of the image is missing so that the whole image is projected.
Configuration Menu Function (Advanced) Menu/Settings Explanation EPSON Super White*2 *6 On, Off (This can only be set when the Color Mode is set to Auto, Natural, Cinema, or3D Cinema and when receiving signal input from the HDMI1 or HDMI2 ports, or from WirelessHD.) Set this to On if you are experiencing bright over exposure of whites in your image. When set to On, HDMI Video Range settings are disabled.
Configuration Menu Settings menu Function Keystone Audio HDMI Link Menu/Settings H/V-Keystone Explanation V-Keystone -60 to 60 Performs vertical keystone correction. s p.27 H-Keystone -60 to 60 Performs horizontal keystone correction. s p.27 Auto V-Keystone On, Off Enables or disables Auto V-Keystone. s p.26 H-Keystone Adjuster On, Off Enables or disables H-Keystone Adjuster. s p.
Configuration Menu Function WirelessHD* Lock Setting Menu/Settings Explanation Device Connections - Displays a list of available Wireless HD devices that can be connected. WirelessHD On, Off Enables or disables the WirelessHD function. Reception Displays the reception. Rename Device Name Device1 to Device9 Allows you to change the names of devices displayed in Device Connections. Erase Device Name Device1 to Device9 Erases the changed device name, and returns the default name in its place.
Configuration Menu Function Projection Menu/Settings Explanation Front, Front/Ceiling, Rear, Rear/Ceiling Change this setting depending on how the projector is installed. • Front: Select if you are projecting in front of the screen. • Front/Ceiling: Select if you are projecting in front of the screen suspended from the ceiling. • Rear: Select if you are projecting to a rear screen from the back.
Configuration Menu Function Display Menu/Settings Explanation Menu Position - Sets the position where the menu should be displayed. Menu Color Color 1, Color 2 Selects the color for the top menu. • Color 1: Black • Color 2: Blue Messages On, Off Sets whether or not to display the following messages (On or Off). • Item names for image signals, color modes, aspect ratios, and loading memory.
Configuration Menu Info menu Function Explanation Lamp Hours Displays the cumulative lamp operating time. Source Displays the source name for the connected equipment currently being projected. Input Signal Displays the content of Input Signal set in the Signal menu according to the source. Resolution Displays the resolution. Scan Mode Displays the scan mode. Refresh Rate Displays the refresh rate.
Configuration Menu Split Screen menu Displayed by pressing the button during split screen projection. Function Split Screen Menu/Settings Explanation Screen Size Equal, Larger Left, Larger Right Changes the left and right screen sizes. s p.48 Source Left, Right PC Video Component HDMI1/HDMI2 WirelessHD* USB Swap Screens Selects which source is displayed on the left and right. s p.48 Changes the left and right screens. s p.
Troubleshooting Problem Solving Reading the Indicators You can check the status of the projector from the flashing and lit on the control panel. , (operation indicators), o and m Refer to the following table to check the projector's status and how to remedy problems shown by the indicators. Indicator status during an error/warning : Lit Indicators Status : Flashing : Off Remedy Replace Lamp It is time to replace your lamp. Replace the lamp with a new lamp as soon as possible. s p.
Troubleshooting Indicators Status Remedy Lamp Error There is a problem with the lamp, or it failed to turn on. Lamp Failure • Disconnect the power cable, and then check if the lamp is cracked. s p.81 If it is not cracked, reinstall the lamp and turn on the power. If reinstalling the lamp does not fix the problem, or if the lamp is cracked, remove the power plug from the electrical outlet, and contact your local dealer or the nearest Epson repair center.
Troubleshooting Indicators Status Projection in progress Remedy The projector is operating normally. (blue) c • Under normal operating conditions, the o and m indicators are off. • When the Illumination function is set to Off, all indicators are off under normal projection conditions. s Extended - Operation - Illumination p.
Troubleshooting Problems relating to images No images appear Check Remedy Is the projector turned on? button on the remote control or the Press the on the control panel. Is the power cable connected? Connect the power cable. Are the indicators switched off? Disconnect and then reconnect the projector's power cable. Check that power is being supplied. Is an image signal being input? Check that the connected device is turned on.
Troubleshooting The message "Not supported" is displayed Check Is the image signal format setting correct? Remedy When Video is input If nothing is projected even when Video Signal is set to Auto from the configuration menu, set the signal that matches the connected device. s Extended - Input Signal - Video Signal p.63 When Component is input If nothing is projected even when Component is set to Auto from the configuration menu, set the signal that matches the connected device.
Troubleshooting Check Has condensation formed on the lens? Remedy If the projector is suddenly taken from a cold environment to a warm environment, or if sudden ambient temperature changes occur, condensation may form on the surface of the lens, and this may cause the images to appear fuzzy. Set the projector up in the room about one hour before it is used. If the projector is wet from condensation, turn off the projector, disconnect the power cable, and leave it for a while.
Troubleshooting Image colors are not right Check Is the image signal format setting correct? Remedy When Video is input If nothing is projected even when Video Signal is set to Auto from the configuration menu, set the signal that matches the connected device. s Extended - Input Signal - Video Signal p.63 When Component is input If nothing is projected even when Component is set to Auto from the configuration menu, set the signal that matches the connected device. s Extended - Input Signal - Component p.
Troubleshooting Problems when projection starts The projector does not turn on Check Remedy Is the power turned on? button on the remote control or the Press the on the control panel. Is Child Lock set to On? When Child Lock is set to On from the configuration menu, hold button on the control panel for approximately down the three seconds, or perform operations from the remote control. s Settings - Lock Setting - Child Lock p.
Troubleshooting Check Remedy Is 3D Display set to Off? If 3D Display is set to Off from the configuration menu, the projector does not automatically change to 3D even when a 3D imbutton. s Signal - 3D Setup - 3D age is input. Press the Display p.58 Is the correct 3D format set? The projector automatically selects the appropriate 3D format, but if the 3D image is not displayed correctly, use 3D Format from the configuration menu to select another format. s Signal - 3D Setup - 3D Format p.
Troubleshooting Check Remedy Is WirelessHD set to Off? When WirelessHD is set to Off from the configuration menu, projection is not possible for WirelessHD input signals. Set Wirebutton. s Settings lessHD to On, and then press the WirelessHD p.61 Are signals being received within the WirelessHD transmission range? Check the range within which the WirelessHD's transceiver can communicate, and view within that range. s p.
Maintenance Maintenance Cleaning the Parts You should clean the projector if it becomes dirty or if the quality of projected images starts to deteriorate. Warning Do not use sprays that contain flammable gas to remove dirt and dust from the projector's lens, air filter, and so on. The projector may catch fire due to the high internal temperature of the lamp. Cleaning the air filter Clean the air filter if dust has accumulated on the air filter or when the following message is displayed.
Maintenance d f Hold the air filter with the surface facing down and tap it 4 or 5 times to remove the dust. Install the air filter into the air filter cover. Insert the protruding section of the air filter into the hole in the cover, and then press it in firmly. Turn it over and tap the other side in the same way. g Attention Install the air filter cover. Press the cover until it clicks into place. If the air filter is hit too hard, it may become unusable due to deformities and cracks.
Maintenance Cleaning the lens Use a commercially available cloth for cleaning glasses to gently wipe off dirt from the lens. Attention Do not rub the lens with harsh materials or handle the lens too roughly as it can easily become damaged. Cleaning the 3D Glasses Use the cloth supplied to gently wipe off dirt from the lenses of the 3D Glasses. Attention Do not rub the lenses of the glasses with harsh materials or handle the lenses too roughly as they can easily become damaged.
Maintenance Replacing Consumables Replacing the air filter c a b Dispose of used air filters in accordance with your local laws and regulations. Material: Polypropylene d Press the button on the remote control or the control panel to turn off the power, and then disconnect the power cable. Insert the protruding section of the air filter into the hole in the cover, and then press it in firmly. Remove the air filter cover.
Maintenance Replacing the lamp Warning When replacing the lamp because it has stopped illuminating, there is a possibility that the lamp may be broken. If replacing the lamp of a projector that has been suspended from the ceiling, you should always assume that the lamp is cracked, and remove the lamp cover with care. When you open the lamp cover, small shards of glass could fall out. If any shards of glass get into your eyes or mouth, contact a doctor immediately.
Maintenance g Tighten the lamp fixing screw. h Install the lamp cover. i Tighten the lamp cover fixing screw. Slide the cover back into place. Warning Do not disassemble or remodel the lamp. Caution • Make sure you install the lamp and lamp cover securely. If they are not installed correctly, the power does not turn on. • The lamp contains mercury. Dispose of used lamps in accordance with your local laws and regulations on disposing of fluorescent tubing.
Maintenance c d Select Reset - Reset Lamp Hours. A reset confirmation message is displayed. Use the buttons to select Yes, and then press the button to execute. The lamp hours are reset.
Appendix Optional Accessories and Consumables The following optional accessories/consumables are available for purchase if required. This list of optional accessories/consumables is current as of: 2011.7. Details of accessories are subject to change without notice. Varies depending on country of purchase. Optional Items Name Ceiling mount* Model No. ELPMB20 Explanation Use when installing the projector on a ceiling.
Appendix Supported Resolutions Component Video Signal Refresh Rate (Hz) Resolution (dots) SDTV (480i) 60 720 x 480 SDTV (576i) 50 720 x 576 SDTV (480p) 60 720 x 480 SDTV (576p) 50 720 x 576 HDTV (720p) 50/60 1280 x 720 HDTV (1080i) 50/60 1920 x 1080 HDTV (1080p) 50/60 1920 x 1080 Composite Video Signal Refresh Rate (Hz) Resolution (dots) TV (NTSC) 60 720 x 480 TV (SECAM) 50 720 x 576 TV (PAL) 50/60 720 x 576 Computer Signals (Analog RGB) Signal Refresh Rate (Hz) Resolu
Appendix HDMI1/HDMI2 Input Signal Signal Refresh Rate (Hz) Resolution (dots) VGA 60 640 x 480 SDTV (480i) 60 720 x 480 SDTV (576i) 50 720 x 576 SDTV (480p) 60 720 x 480 SDTV (576p) 50 720 x 576 HDTV (720p) 50/60 1280 x 720 HDTV (1080i) 50/60 1920 x 1080 HDTV (1080p)* 24/50/60 1920 x 1080 * When projecting in WirelessHD, DeepColor 1080p 60/50 Hz is not supported.
Appendix Specifications Product name EH-TW6000W/EH-TW6000/EH-TW5900 Appearance (not including adjustable foot) 420 (W) x 137.3 (H) x 365 (D) mm Panel Size 0.61" wide Display method Polysilicon TFT active matrix Resolution 1920 (W) x 1080 (H) x 3 Scanning Frequency Digital Pixel Clock: 13.5 - 148.5 MHz Horizontal: 15.63 - 67.5 kHz Vertical: 24 - 60 Hz Analog Pixel Clock: 13.5 - 157.5 MHz Horizontal: 15.63 - 91.
Appendix Обладнання відповідає вимогам Технічного регламенту обмеження використання деяких небезпечних речовин в електричному та електронному обладнанні. Angle of tilt If you use the projector tilted at an angle of more than 10° it could be damaged or cause an accident.
Appendix DECLARATION of CONFORMITY According to 47CFR, Part 2 and 15 Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Located at: Tel: Epson America, Inc. 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806 562-290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device.
Appendix Glossary This section briefly explains the difficult terms that are not explained in context in the text of this guide. For details, refer to other commercially available publications. HDCP HDMI ™ HDCP is an abbreviation for High-bandwidth Digital Content Protection. It is used to prevent illegal copying and protect copyrights by encrypting digital signals sent over DVI and HDMI ports.
Appendix General Notes All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein.
Index Contrast ............................................................ 57 Control panel .............................................. 9, 10 Control panel lock ......................................... 62 Cool-down ....................................................... 23 2 2-2 Pull-down ................................................. 59 3 3D brightness ................................................. 3D display ......................................................... 3D emitter ...............
Index Input signal ............................................... 64, 65 Inverse 3D Glasses ......................................... 58 Inverse audio ................................................... 61 R Reception ......................................................... 62 Refresh rate ...................................................... 65 Remote control ....................................... 13, 21 Rename device name .................................. 62 Rename memory ..........................
Index Tracking ............................................................ 58 Transmission range ...................................... 55 U USB ..................................................................... 51 User button ...................................................... 63 V Video port ........................................................ 18 Video signal .............................................. 64, 65 Viewing area ....................................................
