Operation Manual
Table Of Contents
- Organization of the Guide and Notations in the Guide
- Contents
- Introduction
- Preparing
- Installing
- Connecting a Device
- Preparing the Remote Control
- Basic Operations
- Starting and Ending Projection
- Adjusting the Projected Screen
- Adjusting the Image
- Useful Functions
- Enjoying 3D Images
- Connecting with WirelessHD (EH-TW6600W Only)
- Using the HDMI Link Function
- Playing Back Image Data (Slideshow)
- Projecting Two Different Images Using Picture in Picture
- Configuration Menu
- Troubleshooting
- Maintenance
- Appendix
- Index
Useful Functions
57
Connection example 2: Viewing with a connected AV amplifier
The audio from the device connected to the AV amplifier is output from the amplifier's audio-out port without
passing through the WirelessHD Transmitter.
When outputting audio from a device connected with an MHL cable, you need an optical digital audio cable.
AMP
* When connecting an MHL compatible smart device to the HDMI5 port with an MHL cable, you must connect
the AV amplifier to the Optical Audio-Out port on the WirelessHD Transmitter in order to output the audio.
Also make sure that Audio Out Device is set to AV System.
s Settings - HDMI Link - Audio Out Device p.79
The audio output method to an AV amplifier may be restricted by the specifications of the monitor device,
such as a television, connected to the Output port. For more information on audio output settings, see the
documentation supplied with the AV device.