Operation Manual

Basic Operations
25
Starting and Ending Projection
Turning on the Projector and Projecting
a
Connect the equipment to the
projector.
b
Connect the power cord.
Connect using the power cord supplied.
c
Turn on the connected equipment.
d
Turn on the projector.
Remote control Control panel
The lens shutter opens, and projection
starts.
c
When Direct Power On is set to
On, you can start projecting by
simply connecting the power cord
to the projector without having to
press any buttons.
s Extended -
Operation - Direct Power
On p.73
Warning
Do not look into the lens during projection.
c
•
This projector provides a Child Lock function to prevent children from accidentally turning the power
on and a Control Panel Lock function to prevent accidental operations and so on.
s Settings - Lock
Setting - Child Lock/Control Panel Lock p.70
•
When using at an altitude of 1500 m or more, set High Altitude Mode to On. s Extended - Operation -
High Altitude Mode p.73
•
This projector provides an Auto Setup function to automatically select the optimum settings when the
input signal for the connected computer image changes.
s Signal - Auto Setup p.68
•
This projector comes with a Trigger out port to communicate the current status of the projector's power
(on/off) to external devices. When using this function, set Trigger Out.
s Extended - Operation -
Trigger Out p.73