Operation Manual

Adjusting the Image
32
Input Image Setting Name (Aspect)
Normal Full Zoom
Letterbox Images
*
Notes
Matches the vertical size of
the projection panel. The
aspect ratio differs de‐
pending on the input im‐
age.
Uses the entire projection
panel.
Retains the aspect ratio of
the input signal, and
matches the horizontal
size of the projection pan‐
el. The top and bottom of
the image may be trunca‐
ted.
*
The letterbox image used in this explanation is a 4:3 aspect ratio image displayed in 16:9 with black margins at
the top and bottom for subtitle placement. The margins at the top and bottom of the screen image are used for
subtitles.
For EH-TW9200W/EH-TW9200, you can also set Anamorphic Wide and Horiz. Squeeze.
c
•
If Anamorphic Wide is selected when Overscan is set, the image may be truncated. Set Overscan to
Off and then project.
s Signal - Advanced - Overscan p.68
•
When projecting 3D images in Anamorphic Wide, only 1080p/24 Hz/frame packing signals are
supported.
Set Anamorphic Wide and attach a commercially available anamorphic lens to enjoy DVDs, Blu-rays, and so
on of images recorded at Cinema Scope size.
Horiz. Squeeze stretches the horizontal aspect of the input signal. This allows you to project across the full
width of the screen when using a commercially available anamorphic lens.
c
Note that using the aspect ratio function of the projector to reduce, enlarge, or split the projected
image for commercial purposes or for public viewing may infringe upon the rights of the copyright
holder of that image based on copyright law.