Operation Manual

Useful Functions
55
c
Check the status of the Link indicator on the WirelessHD Transmitter.
If the WirelessHD Transmitter is connected to the projector, the Link indicator flashes and then remains
on.
c
If the indicator continues to flash slowly, the WirelessHD Transmitter cannot connect to the
projector and has entered standby status. Make sure the projector has been setup correctly,
such as turning on the power and so on.
d
If projection does not start, press the button on the remote control to change the
source.
Make sure you point the remote control at the projector when using the button on the remote
control.
Projection starts.
e
When connecting two or more AV devices to the WirelessHD Transmitter, press the
button to switch images. s p.59
c
•
When receiving WirelessHD images, make sure WirelessHD is set to On from the Configuration menu.
s Settings - WirelessHD p.70
•
Make sure you turn off the WirelessHD Transmitter if it is not going to be used for an extended period.