Operation Manual

Useful Functions

WirelessHD Settings Menu

Press the button.

The Configuration menu is displayed.

Select Settings - WirelessHD.

The WirelessHD settings screen is

displayed.

Make settings for each of the

displayed functions.

Available functions on the WirelessHD settings menu

Function Explanation

Device Connections Displays a list of available WirelessHD devices that can be connected. The device names

and MAC addresses (device numbers) are displayed in the list. The MAC address is

displayed on the label on the base.

WirelessHD Enables or disables the WirelessHD function.

Reception Displays the reception.

WiHD Mode

Use Normal for most situations. Full mode uses the maximum video bandwidth at all

times. Dynamic mode extends wireless ranges while optimally adjusting video band‐

width. Set to Dynamic if the image is interrupted due to weak signals and other causes.

Reset

Resets WirelessHD settings to their default settings.

WirelessHD Transmission Range

The following shows the communication transmission range for the WirelessHD. Make sure you set up the

WirelessHD Transmitter so that it faces the projector.

Horizontal direction (when WiHD Mode is set to Nor‐

mal)

Horizontal direction (when WiHD Mode is set to Dy‐

namic)