Operation Manual

Configuration Menu
71
Function Menu/Settings Explanation
WirelessHD
*
Device Connections - Displays a list of available Wire‐
lessHD devices that can be connec‐
ted.
WirelessHD On, Off Enables or disables the WirelessHD
function.
Reception
Displays the reception.
WiHD Mode Full, Dynamic Sets the connection mode of Wire‐
lessHD devices.
Reset Yes, No
Resets WirelessHD settings to their
default settings.
Note that even if you reset the pro‐
jector, the WirelessHD Transmitter
settings are not reset. See the doc‐
umentation supplied with your
WirelessHD Transmitter for details
on how to reset the WirelessHD
Transmitter.
Lock Setting
Child Lock On, Off
This locks the
button on the
projector's control panel to prevent
children from turning on the pro‐
jector by accident. You can turn on
the power when locked by holding
down the
button for approxi‐
mately three seconds. You can still
turn off the device using the
button, or perform operations with
the remote control as usual.
If changed, this setting is enabled
after you power off the projector
and the cool-down process is com‐
plete.
Note that even if Child Lock is set to
On, the projector still turns on when
the power cord is connected if Di‐
rect Power On is set to On.
Control Panel Lock On, Off
When set to On, all buttons on the
control panel except for the
button are disabled. is dis‐
played on the screen if any buttons
are pressed. To unlock, press and
hold the
button on the con‐
trol panel for at least 7 seconds.
If changed, this setting is enabled
once you close the Configuration
menu.