User`s guide

Useful Functions
54
b
Connect the WirelessHD Transmitter
to an electrical outlet using the
supplied AC adapter.
c
Using an HDMI cable, connect the AV
device you want to use to the Input
port on the WirelessHD Transmitter.
You can connect up to five multi-media
players.
c
•
You can connect another output device, such as a television, to the Output port on the WirelessHD
Transmitter. You can switch between output images using the remote control.
s p.58
•
The HDMI5 port of the WirelessHD Transmitter supports the MHL input signal. You can play content
from smartphones or tablets connected with an MHL cable.
Projecting Images
a
Start playback on the AV device, and then turn on the projector and the WirelessHD
Transmitter.
The t indicator on the WirelessHD Transmitter turns on.
b
Check the status of the WiHD indicator on the WirelessHD Transmitter.
If the WiHD indicator is on, go to the next step.
If the indicator is off, press the button on the remote control or the WirelessHD Transmitter.
Make sure you point the remote control at the WirelessHD Transmitter when using the
button
on the remote control.
Remote control WirelessHD Transmit‐
ter