User`s guide

4. When you see the following message, press any key to reboot
the system and run the System Configuration program:
Now you should reboot the system to run
the appropriate AUTOEXEC.BAT and
CONFIG.SYS files and start the System
Configuration program.
Press any key to reboot . . .
After a moment, you see the System Configuration program
title screen. If you want to run the program now, see the
information in Chapter 2 before you begin.
If you do not want to configure your computer now, remove
the diskette from drive A and turn off your computer.
The AUTOEXEC.BAT and CONFIG.SYS files on your
Reference 1 diskette are now customized for your country’s
keyboard and configuration information. Whenever you boot
your system from the Reference 1 diskette, the computer runs
the appropriate files for your country.
The System Configuration program also sets the format of the
date and time in your computer’s real-time clock to the
appropriate format for your country.
Setting Up Your System l-9