Epson ELPDC05 High Resolution Document Camera ® User’s Guide
Important Safety Information WARNING: Never open any cover on the document camera. Dangerous electrical voltages inside the document camera can severely injure you. Do not attempt to service this product yourself. Refer all servicing to qualified service personnel. WARNING: The document camera and its accessories come packaged in plastic bags. Keep plastic bags away from small children to avoid any risk of suffocation. WARNING: Never attempt to replace the lamps.
Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Getting the Most from Your Document Camera . . . . . . . . . . 8 Using Your Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Getting More Information . . . . . . . . . . . . . . . . . . . . . . . . 9 Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1 Setting Up the Document Camera . . . . . . . . . . 11 2 Using the Document Camera . . . . . . . . . .
Adjusting the Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Zooming and Focusing Your Image . . . . . . . . . . . . . . . . 26 Doubling the Size of the Image . . . . . . . . . . . . . . . . . . . 27 Adjusting the Brightness . . . . . . . . . . . . . . . . . . . . . . . . 27 Increasing Image Contrast . . . . . . . . . . . . . . . . . . . . . . . 28 Adjusting the White Balance . . . . . . . . . . . . . . . . . . . . . 28 Rotating the Image . . . . . . . . . . . . . . . . . . . . . . .
4 Solving Problems 5 Technical Specifications . . . . . . . . . . . . . . . . . . . . . 49 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Solving Problems with the Image . . . . . . . . . . . . . . . . . . . . . 44 Solving Problems with the Remote Control . . . . . . . . . . . . . 47 Where To Get Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Telephone Support Services . . . . . . . . . . . . . . . . . . . . . . 48 General. . . . . . . . . . . . . . . . . . . . . .
Welcome Your versatile Epson ® ELPDC05 High Resolution Document Camera can be connected to most types of projectors and display devices. From boardrooms to auditoriums to courtrooms, you can show fine detail with a large variety of presentation materials. You can even display three-dimensional objects with perfect illumination and depth of focus. Your document camera captures images at a resolution of 1024 × 768 pixels, with a maximum shooting area of 13.7 × 10.2 inches (350 × 260 mm).
Getting the Most from Your Document Camera Depending on your presentation, you can take advantage of any or all of these options: ■ Connecting to a projector or TV/computer monitor The document camera requires an output device, such as a projector or TV/computer monitor, to display its image. To connect the document camera to these devices, see page 16. ■ Connecting to a laptop or desktop computer You can connect up to two video output sources, such as laptops or desktop computers.
Getting More Information Need tips on giving presentations or more information about your document camera? Here’s where you can look for help: ■ http://www.presentersonline.com Includes a library of articles covering presentation tips, tricks, and technology. The site provides templates, clip art, and sound clips, as well as Presenters Services to use on the road. Even more resources and services are available if you register to join the Presenters Club®—and it’s free. ■ http://support.epson.
Welcome
Setting Up the Document Camera T his chapter explains how to set up the document camera for a video presentation.
Unpacking the Document Camera After unpacking the document camera, make sure you have all the items shown below: Batteries Remote control Document camera S-video cable Mouse Epson Utility Software CD-ROM Power cord RGB video cable RCA cable USB cable Save all the packaging in case you need to ship the document camera later. Always use the original packaging (or equivalent) when you need to send the document camera to another location. For transportation instructions, see page 42.
Installing Batteries in the Remote Control Before using the remote control, install its batteries. 1. Press down on the battery cover and slide it off. caution When replacing batteries, take the following precautions: ■ Don’t mix old and new batteries. ■ Replace batteries as soon as they run out. If the batteries leak, wipe away battery fluid with a soft cloth. If fluid gets on your hands, wash them immediately. ■ Don’t expose batteries to heat or flame.
Positioning the Document Camera caution Don’t hold or lift the document camera by the camera head arm or lighting unit arms; this may damage them. Before connecting the document camera, you need to decide where to place it. Follow these guidelines: ■ Place the document camera on a sturdy, level surface. ■ Make sure there is plenty of space for ventilation around and under the document camera.
Unfolding the Document Camera Follow these steps to unfold the document camera: 1. Raise the arm for the left lighting unit until it stops. Then raise the right lighting unit. 2. Position the lighting units so that they face the stage (downward). 3. Press the camera arm release button as you raise the camera arm. When the camera arm stops, release the button to lock the arm into place.
4. Rotate the camera head so that the lens faces the stage (downward). Connecting to a Projector or TV/Computer Monitor You can connect the document camera to any projector or monitor that has a standard RGB video, composite video, or S-video input port. Epson projectors support these connections. Most computer monitors support only RGB video, while many television monitors support composite video. Follow the instructions below to connect the document camera to your display device.
Connecting the RGB Video Cable Before you start, make sure your document camera and projector or computer monitor are turned off. 1. Connect one end of the RGB video cable to the document camera’s RGB OUT port. Projector RGB OUT port note The RGB video input port on the projector or monitor may be labeled “computer,” or “video in.” or Monitor 2. Connect the other end to the RGB video input port on the projector or computer monitor. 3. Tighten the screws on the connectors.
Connecting the S-Video Cable Before you start, make sure your document camera and projector or TV are turned off. 1. Connect one end of the S-video cable to the document camera’s S-VIDEO OUTPUT port. Projector or S-VIDEO OUTPUT port TV 2. Connect the other end to the S-video input port on the projector or TV. Connecting to a Computer note For best image quality when projecting a computer image, connect your projector or monitor to the document camera using the RGB OUT port.
Before you start, make sure your document camera and computer(s) are turned off. 1. Connect one end of the RGB video cable to the RGB1 INPUT port on the document camera. Laptop RGB input ports Computer 2. Connect the other end of the RGB video cable to your computer’s RGB video output (monitor) port. 3. Tighten the screws on the connectors. 4. To connect a second computer, repeat the preceding steps, except connect the RGB video cable to the RGB2 INPUT port on the document camera.
Adjusting the Camera DIP Switches note Make sure the document camera is turned off before you change the DIP switch settings. The document camera has two DIP switches that control special settings. Refer to the table below to make sure they are set correctly for your configuration. DIP switches DIP Switch 0 1 Function A NTSC* PAL Selects the TV video output format. Select NTSC for US model TV sets and PAL for European TV sets.
Using the Document Camera Once you have set up the document camera, you’re ready to turn it on, adjust the image, and give your presentation.
Turning On Your Equipment Make sure your document camera and other equipment are set up and connected correctly, as described in Chapter 1. Always turn on your projector or monitor first. Then turn on your document camera, as described below, followed by any other equipment you’ve connected to it. If you have one or two computers connected to the document camera’s RGB INPUT ports, you may have to switch between sources to see the desired image. See page 24 for details.
5. Place your presentation material on the stage. You should see an image on screen. Once you see your image, turn to page 25 for instructions on making adjustments. If your image doesn’t appear, see the next section for help. note If you turn off the document camera, always wait a few seconds before turning it back on. When you’re done with your presentation, turn off the document camera as described on page 37.
Switching Between Picture Sources note You can also press the RGB1, RGB2, and MAIN buttons on the document camera to switch to a different video source. If you have an external video source connected to the document camera, such as a laptop or desktop computer, you can switch between the video source and the camera. ■ If you’ve connected a computer to the RGB1 INPUT port on the document camera, press the RGB1 button on the remote control.
Turning the Lamps Off and On Press the UPPER LAMP button on the remote control to turn off the lamps. Press it again when you want to turn the lamps back on. There will be a slight delay before the lamps turn back on. Press the BASE LAMP button on the remote control to turn the base lamp on. Press it again to turn the base lamp off.
Zooming and Focusing Your Image Use the Tele button on the document camera or remote control to enlarge the image, and use the Wide button to reduce it. The document camera will automatically focus the image. note The auto focus function works up to a height of approximately 3.9 in. (10 cm) above the stage surface.
Doubling the Size of the Image You can instantly double the size of the displayed image by pressing the 2x button on the remote control, or pressing the right mouse button if a mouse is attached to the document camera’s MOUSE port (see page 19). To return the image to its original size, press the 2x button or the right mouse button again. Doubles the size of the image PAUSE 2x SET Adjusting the Brightness PRESETCALL POSI/NEGA COLOR/B&W The document camera is initially set to auto iris.
Increasing Image Contrast Some images display best when the contrast between the image and its background is increased. To increase contrast, press the CONTRAST button on the document camera. To turn contrast off, press the button again.
Switching between Color and Black and White Sometimes you may want to switch to a black and white image. For example, a black and white display allows you to project text without color interference, resulting in a sharper image. To switch from color to black and white, press the COLOR/B&W button on the remote control. Press it again when you want to switch back to color.
Using the Pointer Center wheel Left mouse button Right mouse button The pointer lets you direct attention to specific sections of your presentation material. You can choose from two types of pointers in four colors. To display the pointer, connect the mouse that came with the document camera to the MOUSE port (see page 19) and press either the left mouse button or the center wheel. The mouse allows you to move the pointer as you would on a computer.
The table below lists the various functions and their descriptions. To select an item, point and click the left mouse button or center wheel. Icon Name Function Upper Lamps On/Off Turns the upper lamps on and off. (It may take a few seconds for the lamps to come on again.) Base Lamp ON/OFF Turns the base lamp on and off. (The first time you click the icon, it turns the base lamp on and the upper lamps off.) Color/B&W Switches the display from color to black and white.
Icon 32 Name Function White Balance Displays the white balance adjustment menu. White Balance Automatic Automatically adjusts the white balance and corrects color casts. White Balance One Touch Click once to correct color shift for the current lighting environment. White Balance Manual Enables manual white balance adjustment. Click the arrows below to adjust the colors individually to compensate for color casts.
Projecting Transparencies Switches between normal projection and negative film projection The document camera enables you to project both positive and negative film with great clarity. Follow these steps: 1. Place your film or slides on the document camera’s stage with the dull side facing up. PAUSE 2. Do one of the following to turn the upper lamps off and the base lamp on: ■ Press the UPPER LAMP button on the remote control, and then the BASE LAMP button.
Saving Settings and Images note Camera settings remain in memory even when you turn the document camera off. However, saved images are deleted when the camera is turned off. You can save up to eight groups of document camera settings for later use. That way, if you want to present the same type of materials (for example, negative film), you can quickly recall your settings with a simple push of a button. You can also recall up to eight individual images captured by the document camera.
Using the Camera Head as a Conventional Video Camera By rotating the camera head to a horizontal position, you can use the document camera as a conventional video camera. To view walls or distant objects, flip down the close-up lens. The document camera can resolve images from 1.6 feet (0.5 m) to infinity. note The camera’s shutter operates at 20 frames per second.
4. When you see the license agreement, click Agree, then Next to continue. 5. When installation is complete, click Finish. Viewing the On-Screen Manual To view the on-screen manual, do the following: 1. Insert the Epson Utility Software CD-ROM in your drive. 2. Open the CD-ROM window. 3. If you have Adobe® Acrobat® Reader® installed on your computer, go to step 6. If you don’t have Adobe Acrobat Reader installed, double-click the Acrobat folder. 4. Double-click the US folder, then double-click ar500enu.
Turning Off and Storing the Document Camera When you’ve finished using the document camera, follow these steps to turn off and store it. If you’re using a monitor or projector, shut it down last. 1. Turn off the document camera. 2. Unplug the power cord and disconnect any attached video cables. 3. If the close-up lens is flipped down, close it. 4. Place the remote control inside the remote control storage compartment and close the tray.
5. Rotate the camera head to its storage position. 6. Press the camera arm release button as you carefully lower the camera arm onto the stage. Camera arm release button 7. Lower the arm for the right lighting unit, and then lower the arm for the left lighting unit.
Maintaining and Transporting the Document Camera Y warning Before you clean any part of the document camera, turn it off and unplug the power cord. Never open any cover on the document camera. Dangerous electrical voltages in the document camera can injure you severely. Don’t try to service this product yourself. Refer all servicing to qualified service personnel. our document camera needs little maintenance. All you need to do on a regular basis is keep the lenses and stage clean.
Cleaning the Lenses Clean the lenses whenever you notice dirt or dust on the surface. ■ Use a canister of compressed air to remove dust. ■ To remove dirt or smears on the lenses, use lens-cleaning paper. If necessary, moisten a soft cloth with lens cleaner and gently wipe the lens surface. ■ Clean both sides of the close-up lens.
Cleaning the Document Camera Case Before you clean the case, first turn off the document camera and unplug the power cord. ■ To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth. ■ To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral detergent. Then wipe the case. ■ Do not use wax, alcohol, benzene, thinner, or other chemical detergents. These can damage the case. ■ Take special care when cleaning the stage, or you may scratch it.
Transporting the Document Camera note Epson shall not be liable for any damages incurred during transportation. The document camera contains many glass and precision parts. If you need to transport it, follow these guidelines to prevent damage to the document camera: ■ Make sure to turn off and fold the document camera as described on page 37. ■ When shipping the document camera for repairs, use the original packaging material if possible.
Solving Problems This chapter helps you solve problems with your document camera, and tells you how to contact technical support for problems you can’t solve yourself.
Solving Problems with the Image No image appears on the screen. ■ Check that all cables are properly connected (see Chapter 1) and everything is turned on. ■ Make sure the power switch is turned on. ■ Make sure the projector or computer is not in sleep mode. Check the projector documentation, or try pressing a key on the computer keyboard. ■ The document camera may have been turned on too quickly after it was turned off. Turn the document camera off, wait a few seconds, and then turn it on again.
■ For best image quality when projecting a computer image, connect your projector or monitor to the document camera’s RGB OUT port. The image is blurry. ■ There may be dirt on the lenses. Clean the lenses as described on page 40. ■ Try pressing the AF (Auto Focus) button on the remote control, or the AUTO FOCUS button on the document camera. ■ Some objects do not focus well automatically (see page 26). Manually focus these objects using the Near and Far buttons.
The image is garbled. ■ Make sure your computer and/or projector or monitor are securely connected at both ends to the document camera. ■ Check the DIP switches on the document camera. If video output is set to NTSC and the document camera is connected to a monitor that supports PAL, the image may appear garbled. See page 20 for instructions on adjusting the DIP switches. A color image displays in black and white.
Solving Problems with the Remote Control ■ Make sure you are within 23 feet (7 m) of the document camera, and within range of the document camera’s sensor (approximately 30° to the left or right and 15° above or below). ■ The remote control batteries may not be installed correctly or may be low on power. Try changing the batteries as described on page 13. ■ Dim the room lights and turn off any fluorescent lighting. Make sure the document camera is not in direct sunlight.
Where To Get Help Epson provides technical assistance through electronic support services 24 hours a day, as listed in the following table: Service Access World Wide Web From the Internet, you can reach Epson’s product support at http://support.epson.com. After selecting your product, you can access troubleshooting information, download product documentation, and receive technical advice through e-mail.
Technical Specifications General CCD 1/3 inch (848,676 progressive scan) Resolution 1024 × 768 pixels (Effective resolution, or overscan, is 1034 × 779 pixels) Lens F=2.8, f=4.7 to 84.6 mm Frame speed 20 frames per second Shooting area 13.7 × 10.2 in. (350 × 260 mm) max. 1.0 × 0.8 in. (25 × 19 mm) min. Limit of focus adjustment 3.9 in. (100 mm) from the stage surface using the close-up lens 1.6 feet (0.
Lamps Upper High frequency fluorescent, 6 W × 2 Base High frequency fluorescent Remote Control Range Angle from IR receiver Batteries 23 feet (7 m) Approx. 30° to the right or left, and 15° up or down Alkaline AAA (2) Dimensions Weight 21.6 lb (9.8 kg) Folded (h × w × d) 7.1 × 15.7 × 21.3 in. (181 × 400 × 542 mm) Unfolded (h × w × d) 21.9 × 27.4 × 21.3 in.
Safety United States FCC 47CFR Part 15B Class B (DoC) UL1950 3rd Edition Canada ICES-003 Class B CSA C22.2 No.950-95 (cUL) Compatible Video Formats The document camera supports NTSC and PAL video standards, as well as the monitor display formats listed below. Mode Refresh Rate (Hz) Resolution VGA1 84.889 640 × 350 VGA2 85.08 640 × 400 VGA3 85.039 720 × 400 VGA—60 59.94 640 × 480 VGA—72 72.809 640 × 480 VGA—75 75 640 × 480 VGA—85 85.008 640 × 480 SVGA—56 56.
Technical Specifications Mode Refresh Rate (Hz) Resolution SXGA—75 75.025 1280 × 1024 SXGA—85 85.024 1280 × 1024 UXGA—60 60 1600 × 1200 UXGA—65 65 1600 × 1200 UXGA—70 70 1600 × 1200 UXGA—75 75 1600 × 1200 UXGA—85 85 1600 × 1200 MAC 13 66.667 640 × 480 MAC 16 74.55 832 × 624 MAC 19 74.927 1024 × 768 MAC 21 75.062 1152 × 870 PC98 56.
Notices This chapter includes safety instructions and other important information about your Epson document camera. Important Safety Instructions Follow these safety instructions when setting up and using the document camera: ■ Before setting up the document camera, read all safety and operating instructions. Keep the instructions for future reference. ■ Be sure to adhere to all warnings in the documentation and on the document camera.
■ Do not block or cover openings in the base, or insert objects through the slots. These openings are provided for ventilation to protect the document camera from overheating. Never place the document camera on a bed, sofa, rug, or similar surface. Do not place the document camera in a built-in installation, such as a bookcase or rack, unless proper ventilation is provided and the guidelines in this manual are followed.
■ Do not let the power cord become damaged or frayed. Place the document camera in a location where people are unlikely to walk on the power cord, and the cord is not pinched by items placed upon or against it. ■ Unplug the document camera and disconnect the cable when not in use, or when there is a lightning storm. This will prevent damage to the product due to power surges and lightning.
■ Certain types of fluorescent lighting are used. ■ A strong light source shines into the IR receiver. ■ Other equipment that emits infrared energy, such as a radiant room heater, is in the room. These conditions commonly cause problems for most infrared-controlled equipment. Try the following if you experience problems: ■ The remote control batteries may be low on power; replace them. ■ Dim the ambient lighting and/or turn off any fluorescent lights.
Declaration of Conformity According to 47CFR, Part 2 and 15 Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Located at: Epson America, Inc. 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806 Telephone: (562) 290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device.
FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception.
Warranty Epson America, Inc. Limited Warranty What Is Covered: Epson America, Inc. (“Epson”) warrants to the first end user customer of the Epson product enclosed with this limited warranty statement that the product, if purchased and used in the United States or Canada, conforms to the manufacturer’s specifications and will be free from defects in workmanship and materials for a period of two (2) years from the date of original purchase (except that the warranty period is 90 days for lamps).
THE EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED TO THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS STATED HEREIN, ANY STATEMENTS OR REPRESENTATIONS MADE BY ANY OTHER PERSON OR FIRM ARE VOID. EXCEPT AS PROVIDED IN THIS WRITTEN WARRANTY, NEITHER EPSON AMERICA, INC.
Index Numerics 2x button, 27 3-D objects, presenting, 26 A Accessories, 44 Adjusting settings, 25 to 32 Aperture, 32 AUTO/MANUAL button, 27 B Batteries, installing, 13 Blank screen, 23 Blurry image, 45 Brightness, adjusting, 27, 31 Buttons 2x, 27 FOCUS, 26 IMAGE, 34 INPUT, 24 IRIS, 27 LAMP, 25 PAUSE, 29 POSI/NEGA, 33 PRESET, 34 ZOOM, 26 Connecting document camera to a computer, 18 to 19 to a monitor, 16 to 18 to a mouse, 19 to a projector, 16 to 18 Contrast, adjusting, 28 D Declaration of Conformity, 57
H O Help, 9, 48 On-screen display, adjusting settings, 30 to 32 OPEN button, 27 Options, ordering, 44 I Image brightness, 27 changing to black and white, 29, 31 contrast, 28 enlarging and reducing, 26 to 27, 31 focusing, 26, 31 freezing, 29, 31 rotating, 28, 32 saving and recalling, 34 sources, selecting, 24 troubleshooting, 23, 44 to 46 white balance, 28, 32 Image Mate Software, 35 to 36 Infrared receiver, 14, 50 Iris, adjusting, 27, 31 L Lamps specifications, 50 turning off and on, 24 to 25, 31 Lens
Service, see Technical support Settings, saving, 32 to 34 Shooting speed, 35, 49 Slides, projecting, 32 to 33 Software, using, 35 to 36 Specifications dimensions, 50 electrical, 50 environmental, 50 general, 49 lamps, 50 lens, 49 power, 50 remote control, 50 safety, 51 video formats, 51 to 52 Storing document camera, 37 to 38 Support, see Technical support S-VIDEO port, 18 U T Z Technical support, 9, 48 TELE button, 26 Television, connecting, 16 to 18 Temperature requirements, 50 Transparencies, project
Index
