Projector User Manual
Table Of Contents
- Projector Features
- Contents
- Before Using the Projector
- Part Names and Functions
- Before Using the Remote Control
- Installation
- Inserting and Removing Cards (EMP-765/755 only)
- Connecting to a Computer
- Connecting to a Video Source
- Playing Sound from Video Equipment
- Playing Sound from External Speakers (EMP-765/755 only)
- Connecting USB Devices (Digital Camera, Hard Disk Drive or Memory Devices) (EMP-765/755 only)
- Preventing theft (Password Protect)
- Basic Operations
- Advanced Operations
- Troubleshooting
- Appendices
106
Saving a User's Logo
User’s Guide
Select "Yes" in the sub-menu, then press the [Enter]
button.
The image to be recorded and a selection marquee
box will be displayed. Move the marquee box to select
the part of the image to use.
Tilt the [ ] button on the remote control or press the [ ], [ ],
[ ] and [ ] buttons on the projector's control panel to select the
area of the image to use as the user's logo, and then press the
[Enter] button.
3
TIP
When you press the [Enter] button on either the remote control or the
projector's control panel, the image signal will be displayed at their
original resolution, so if a signal with a resolution that is different
from the panel resolution of the projector is projected, or if a video
image is being projected, the display size will change.
4
TIP
User's logos can be saved at up to 480 × 360 dots in size.