Projector User Manual
Table Of Contents
- Projector Features
- Contents
- Before Using the Projector
- Part Names and Functions
- Before Using the Remote Control
- Installation
- Inserting and Removing Cards (EMP-765/755 only)
- Connecting to a Computer
- Connecting to a Video Source
- Playing Sound from Video Equipment
- Playing Sound from External Speakers (EMP-765/755 only)
- Connecting USB Devices (Digital Camera, Hard Disk Drive or Memory Devices) (EMP-765/755 only)
- Preventing theft (Password Protect)
- Basic Operations
- Advanced Operations
- Troubleshooting
- Appendices
107
Saving a User's Logo
User’s Guide
Select "Yes" at the confirmation screen, and then
press the [Enter] button.
Select the zoom rate in the Zoom rate setting screen,
and then press the [Enter] button.
Select "Yes" at the confirmation screen, and then
press the [Enter] button.
The image will then be saved. Once the image has been saved,
the message "Completed." will be displayed.
5
6
7
TIP
•Saving the user's logo may take a few moments (about 15 seconds).
Do not use the projector or any other sources which are connected to
the projector while the user's logo is being saved, otherwise it may
result in errors in projector operation.
•Once a user's logo has been saved, the logo setting cannot be
returned to the factory default.