Projector User Manual
Table Of Contents
- Projector Features
- Contents
- Before Using the Projector
- Part Names and Functions
- Before Using the Remote Control
- Installation
- Inserting and Removing Cards (EMP-765/755 only)
- Connecting to a Computer
- Connecting to a Video Source
- Playing Sound from Video Equipment
- Playing Sound from External Speakers (EMP-765/755 only)
- Connecting USB Devices (Digital Camera, Hard Disk Drive or Memory Devices) (EMP-765/755 only)
- Preventing theft (Password Protect)
- Basic Operations
- Advanced Operations
- Troubleshooting
- Appendices
15
User’s Guide
Installation
Setting Up the Projector
The projector supports the following four different projection methods,
allowing you to choose the best method for displaying your images.
* A special method of installation is required for suspending the projector
from the ceiling. Please contact your supplier if you would like to use
this installation method. The optional ceiling mount is required when
installing the projector on the ceiling. sp.108
CAUTION
•Before setting up the projector, make sure you read the separate
Safety Instructions/World-Wide Warranty Terms first.
•Do not set this projector up on its side to carry out projection,
otherwise malfunctions may occur.
• Front projection
• Rear projection using a translucent screen
• Front/ceiling projection
• Rear/ceiling projection using a translucent screen
TIP
When using ceiling projection or projection using a translucent
screen, set the "Projection" command in the "Extended" menu to
match the installation method. sp.65