Projector User Manual
Table Of Contents
- Projector Features
- Contents
- Before Using the Projector
- Part Names and Functions
- Before Using the Remote Control
- Installation
- Inserting and Removing Cards (EMP-765/755 only)
- Connecting to a Computer
- Connecting to a Video Source
- Playing Sound from Video Equipment
- Playing Sound from External Speakers (EMP-765/755 only)
- Connecting USB Devices (Digital Camera, Hard Disk Drive or Memory Devices) (EMP-765/755 only)
- Preventing theft (Password Protect)
- Basic Operations
- Advanced Operations
- Troubleshooting
- Appendices
21
Connecting to a Computer
User’s Guide
Projecting Images from a Computer
The shape and specifications of the computer's monitor port will determine
what type of cable should be used. Check the following to see which type
of port your computer has.
Use the accessory computer cable to make the connection.
If the Monitor Port is a Mini D-Sub 15-pin Port (Example)
Computer cable
(accessory)
To monitor port
To [Computer/Component Video]
port (blue)
TIP
•The input source is determined automatically based on the input
signals.
Some computer signals may be reproduced with different colours
from the original images. In such case, set the input source to
"Computer". sp.60
•If more than one input source is connected to the projector at the
same time, you can use button operations to select the signals to be
projected. sp.37