Projector User Manual
Table Of Contents
- Projector Features
- Contents
- Before Using the Projector
- Part Names and Functions
- Before Using the Remote Control
- Installation
- Inserting and Removing Cards (EMP-765/755 only)
- Connecting to a Computer
- Connecting to a Video Source
- Playing Sound from Video Equipment
- Playing Sound from External Speakers (EMP-765/755 only)
- Connecting USB Devices (Digital Camera, Hard Disk Drive or Memory Devices) (EMP-765/755 only)
- Preventing theft (Password Protect)
- Basic Operations
- Advanced Operations
- Troubleshooting
- Appendices
26
Connecting to a Video Source
User’s Guide
Projecting RGB Video Images
Use the accessory computer cable to make the connections.
To RGB output port
Computer cable
(accessory)
To [Computer/Component Video]
port (blue)
TIP
•The input source is determined automatically based on the input
signals.
Some video signals may be reproduced with different colours from
the original images. In such case, set the input source to
"Computer". sp.60
•If more than one input source is connected to the projector at the
same time, you can use button operations to select the signals to be
projected. sp.37