Projector User Manual
Table Of Contents
- Projector Features
- Contents
- Before Using the Projector
- Part Names and Functions
- Before Using the Remote Control
- Installation
- Inserting and Removing Cards (EMP-765/755 only)
- Connecting to a Computer
- Connecting to a Video Source
- Playing Sound from Video Equipment
- Playing Sound from External Speakers (EMP-765/755 only)
- Connecting USB Devices (Digital Camera, Hard Disk Drive or Memory Devices) (EMP-765/755 only)
- Preventing theft (Password Protect)
- Basic Operations
- Advanced Operations
- Troubleshooting
- Appendices
28
User’s Guide
Playing Sound from External Speakers (EMP-765/755 only)
When projecting using the CardPlayer function of EasyMP, you can output the
audio signals to external speakers.
Set the "EasyMP Audio Out" to "External" and connect speakers with built-in
amplifiers to the projector's [Audio] port in order to enjoy a fuller quality of
sound.
sp.63
Use a commercially-available audio cable with pin jack ⇔ stereo mini jack
(3.5 mm) plugs or similar.
Use an audio cable with a plugs that match the ports for the external audio
equipment.
To external audio equipment
To [Audio] port
Audio cable
(commercially-available)
TIP
•When using an external speaker to output the sound, you cannot
control the volume.
•When projecting images using the LAN connection function of
EasyMP, audio signals cannot be output by the projector.