Projector User Manual
Table Of Contents
- Projector Features
- Contents
- Before Using the Projector
- Part Names and Functions
- Before Using the Remote Control
- Installation
- Inserting and Removing Cards (EMP-765/755 only)
- Connecting to a Computer
- Connecting to a Video Source
- Playing Sound from Video Equipment
- Playing Sound from External Speakers (EMP-765/755 only)
- Connecting USB Devices (Digital Camera, Hard Disk Drive or Memory Devices) (EMP-765/755 only)
- Preventing theft (Password Protect)
- Basic Operations
- Advanced Operations
- Troubleshooting
- Appendices
43
Adjusting the Screen Image
User’s Guide
Manually Correcting Keystone Distortion
The projector is provided with an automatic keystone correction function
which detects the vertical angle of the projector and carries out keystone
correction automatically. If you would like to make further fine
adjustments to the results of automatic keystone correction, press the [ ]
and [ ] buttons.
PROCEDURE
Projector Projector
If the bottom of the
image is elongated
If the top of the
image is elongated
TIP
•When keystone correction is carried out, the projected image will
become smaller.
•If the text part of the image is blurred after keystone correction is
carried out, decrease the sharpness setting. sp.56, p.58
•Keystone correction can also be carried out using the configuration
menu. sp.62
•If the value displayed in the gauge on the screen stops changing
when keystone correction is being carried out, it indicates that the
limit for keystone correction has been reached. Check that the
projector has not been set up at an angle which exceeds the proper
limit.