Projector User Manual
Table Of Contents
- Projector Features
- Contents
- Before Using the Projector
- Part Names and Functions
- Before Using the Remote Control
- Installation
- Inserting and Removing Cards (EMP-765/755 only)
- Connecting to a Computer
- Connecting to a Video Source
- Playing Sound from Video Equipment
- Playing Sound from External Speakers (EMP-765/755 only)
- Connecting USB Devices (Digital Camera, Hard Disk Drive or Memory Devices) (EMP-765/755 only)
- Preventing theft (Password Protect)
- Basic Operations
- Advanced Operations
- Troubleshooting
- Appendices
44
User’s Guide
Adjusting the Image Quality
The quality of the screen images can be adjusted as follows.
Adjusting Computer Images and RGB Video Images
Automatic setup detects analogue RGB signals coming from a connected
computer, and automatically adjusts these signals so that the optimum
images can be obtained.
Automatic setup involves adjustment of the following three items:
Tracking
g, Position and Sync (synchronisation)g.
Automatic Setup
TIP
•If "Auto Setup" in the "Signal" menu is set to "OFF" (the default
setting for this item is "ON"), automatic setup is not carried out. In
this case, press the [Auto] button on the remote control or the [Enter]
button on the projector's control panel to make the adjustment while
computer or RGB video images are being projected.
When you press the [Auto] button, the screen will turn to solid black
colour for a moment and then return to a previous image. The auto
adjustment is still in progress even after returning to the previous
image. Wait about 3 seconds before pressing any other buttons.
•If you press the [Auto] button while the E-Zoom function or Freeze
function is activating, the auto adjustment will start after canceling
those functions.
•Sometimes the signals may not be adjusted correctly depending on
the type of computer or RGB video signals being output. In such
cases, use the configuration menu commands to adjust the tracking
and sync settings manually. sp.45, p.46
Remote control
Projector