Projector User Manual
Table Of Contents
- Projector Features
- Contents
- Before Using the Projector
- Part Names and Functions
- Before Using the Remote Control
- Installation
- Inserting and Removing Cards (EMP-765/755 only)
- Connecting to a Computer
- Connecting to a Video Source
- Playing Sound from Video Equipment
- Playing Sound from External Speakers (EMP-765/755 only)
- Connecting USB Devices (Digital Camera, Hard Disk Drive or Memory Devices) (EMP-765/755 only)
- Preventing theft (Password Protect)
- Basic Operations
- Advanced Operations
- Troubleshooting
- Appendices
60
Using the Configuration Menu Functions
User’s Guide
• The "Trackingg", "Sync.g", "Position" and "Resize"
settings can not be adjusted if no signals are being input.
• The items displayed in the "Signal" menu change
depending on the input signal that is being projected.
Menu commands that do not apply to the current input
signal cannot be adjusted.
• If using the EMP-765/755, you cannot change any of the
"Signal" configuration menu settings while EasyMP is
running.
Computer/RGB video
"Signal" Menu
Sub-menu Function Default
Auto Setup Selects whether the automatic adjustment function for
automatically optimising images when the input source is
changed is turned "ON" or "OFF".
ON
Trackingg Adjusts computer images when vertical stripes appear in the
images.
Depends on
connection
Sync.g Adjusts computer images when flickering, fuzziness or
interference appear in the images.
•Flickering and fuzziness may also appear when the
brightness, contrastg, sharpness or keystone settings are
adjusted.
•You can obtain the best results if you adjust the tracking
g
first and then adjust the sync.
Depends on
connection
Position Moves the image display position vertically and horizontally.
•Press the [Enter] button on the remote control or on the
projector's control panel and then make the adjustment
using the display position adjustment screen that appears.
Depends on
connection
Computer
Input
Selects the input signal in accordance with the equipment
that is connected to the [Computer/Component Video] port.
If set to "Auto" the input signal is set automatically in
accordance with the connected equipment.
If you select "Auto", and the colours appear unnatural, select
"Computer".
Auto
Reset Return the all settings in the "Signal" menu to their default
except the "Computer Input" setting.
•Press the [Enter] button on the remote control or on the
projector's control panel.
•To return all settings such as the "Image" and "Signal"
menu settings to their default values, select "Reset All"
from the "Reset" menu.
sp.68
-