Projector User Manual
Table Of Contents
- Projector Features
- Contents
- Before Using the Projector
- Part Names and Functions
- Before Using the Remote Control
- Installation
- Inserting and Removing Cards (EMP-765/755 only)
- Connecting to a Computer
- Connecting to a Video Source
- Playing Sound from Video Equipment
- Playing Sound from External Speakers (EMP-765/755 only)
- Connecting USB Devices (Digital Camera, Hard Disk Drive or Memory Devices) (EMP-765/755 only)
- Preventing theft (Password Protect)
- Basic Operations
- Advanced Operations
- Troubleshooting
- Appendices
61
Using the Configuration Menu Functions
User’s Guide
Component videog
Composite video
g/ S-Videog
Sub-menu Function Default
Position Moves the image display position vertically and horizontally.
•Press the [Enter] button on the remote control or on the
projector's control panel and then make the adjustment
using the display position adjustment screen that appears.
Depends on
connection
Progressive (Adjustment is only possible when composite Video or S-
Video signals are being input.)
OFF: IP conversion is carried out for each field in the screen.
This is ideal for using when viewing images with a large
amount of movement.
ON: Interlaced (i) signals are converted into progressive (p)
signals. This is ideal for using when viewing still images.
OFF
Computer
Input
(Adjustment is only possible when component video signals
are being input.)
Selects the input signal in accordance with the equipment
that is connected to the [Computer/Component Video] port.
If set to "Auto" the input signal is set automatically in
accordance with the connected equipment.
If you select "Auto", and the colours appear unnatural, select
"Component Video".
Auto
Video
Signal
(Adjustment is only possible when composite video/S-Video
signals are being input.)
Sets the video signal format.
•Press the [Enter] button on the remote control or on the
projector's control panel and then make the selection from
the video signal format selection menu that appears.
•When set to "Auto", the video signal format is set
automatically.
Auto
Resize Sets the aspect ratio for projected images. Depends on
connection
Reset Returns "Position" and "Resize" settings in the "Signal"
menu to their default settings.
•Press the [Enter] button on the remote control or on the
projector's control panel.
•To return all settings such as the "Image" and "Signal"
menu settings to their default values, select "Reset All"
from the "Reset" menu.
sp.68
-